Month: April 2022

Installing your appliances might seem cost-effective to save some money, but it can lead to bigger problems later. It’s one of those things you don’t think about until it happens. You go to do the laundry or make dinner, and suddenly your appliance isn’t working as it should. Maybe you’ve even had an appliance catch on fire in your home. Believe it or not, faulty installation is a leading cause of these disasters. This article will discuss seven house appliance risks that can be avoided with proper installation by electrical contractors. Keep reading to learn more!

House Appliance Risks You Can Avoid with Proper Installation

Dishwashers Can Leak if not Properly Installed

Dishwashers are one of the most commonly used appliances in the kitchen. They are a necessity in many homes, and they make life much easier by taking care of the dishes for you. However, dishwashers can also be a source of water leaks if they are not correctly installed. A dishwasher leak can cause extensive damage to your home, and it is crucial to take measures to avoid this type of leakage.

One way to avoid a dishwasher leak is to ensure that electrical contractors properly install the appliance in Arlington, TX. This will ensure that the dishwasher is appropriately sealed to prevent potential leaks. Another way to avoid a dishwasher leak is to check the appliance for any signs of leakage regularly.

If you notice any water around the dishwasher base, it is crucial to address the issue immediately with the help of an electrician. By taking these steps, you can help prevent a dishwasher leak from causing damage to your home.

Washing Machines Can Cause Water Damage if Not Level

A washing machine is one of the essential appliances in any home. It helps to keep clothes and linens clean and fresh. However, a washing machine can also be a source of water damage if it is not correctly installed. When a washing machine is not level, it can vibrate and shake during use. This can cause the water hose to become loose or come disconnected. As a result, water can leak out onto the floor, causing damage to the surrounding area.

Additionally, an unlevel washing machine can place stress on the door seal, leading to leaks. To avoid these problems, hire electrical contractors to install your washing machine. They will level the appliance to ensure it operates properly and does not cause any water damage.

Ovens Can Cause Fires if not Properly Installed

Though they are a vital kitchen appliance, ovens can pose a severe fire risk if they are not correctly installed. When an oven is not installed according to the manufacturer’s instructions, there is a greater chance that something will go wrong and cause a fire. In addition, improper installation can void the warranty, leaving the homeowner responsible for any damage. It is essential to hire electrical contractors to install your oven to avoid these risks. An electrician will ensure that the appliance is connected correctly and that all safety features are in place. Though it may cost a bit more upfront, proper installation can save you a lot of money and hassle in the long run.

Refrigerators Can Increase Your Energy Bill

Most people know that their refrigerator is one of the most energy-consuming appliances in their home. What they may not realize, however, is that improper installation can cause even more energy waste. A refrigerator that is not correctly installed can increase your energy bills by 30 percent. There are a few things to keep in mind when installing your fridge to ensure it runs efficiently. Improper installation can cause the fridge to work harder than necessary, using more energy.

Additionally, an improperly installed fridge can cause the door seal to be less effective, allowing cold air to escape. As a result, your fridge will have to work even harder to maintain the proper temperature, leading to higher energy bills. It is essential to hire electrical contractors in Arlington, TX to install your refrigerator to avoid these problems. They will ensure that the appliance is installed correctly and running as efficiently as possible.

Dryers Can Cause Fires If Not Properly Vented

A dryer is another appliance that can pose a serious fire risk if not properly installed. When a dryer is not adequately vented, the hot air produced during use can build up inside the appliance. This can cause the dryer to overheat, leading to a fire. Additionally, an improperly installed dryer can cause lint to build up inside the appliance. This can also lead to a fire, as the lint is highly combustible. The best way to prevent this is to have your dryer installed adequately by electrical contractors. They will make sure that the vent is installed correctly and clear of any debris. They will also give you advice on keeping the vent clean and clear of lint.

Water Heaters Can Explode or Catch on Fire if not Installed Correctly

No one likes the idea of their home appliances exploding. Water heaters are particularly prone to this type of disaster, but it’s something that can be avoided with proper installation. In most cases, water heater explosions are caused by a pressure buildup within the tank. This can happen when the temperature is too high, or the tank is not vented correctly.

As the water inside the tank heats up, it expands and creates pressure. If this pressure is not relieved, it can cause the tank to rupture. To avoid this, it’s essential to have your water heater installed by electrical contractors. They will ensure that the tank is vented correctly and that the temperature is set at a safe level. Second, regular maintenance is critical to keeping your water heater in good condition.

Hire An Electrician for Home Appliance Installation in Arlington

When it comes to appliance installation, it’s always best to hire electrical contractors. Qualified technicians have the experience and expertise to ensure that your appliances are correctly installed and running safely and efficiently. Electrical contractors can also provide advice on keeping your appliances in good condition and how to avoid potential problems.

If you’re looking for qualified appliance installation in Arlington, TX, look no further than Tioga Contractors. Our skilled technicians are ready to help you with all your appliance needs. Contact us today to schedule a consultation.

Photo By Malikov Aleksandr at Shutterstock

Water heater repair services in Bedford, TX, are easy to come by. There are plenty of companies that specialize in the service. It’s your responsibility to see which are the best options for you to choose from that day. Learning all that you can about a company before hiring it helps you decide how you’ll spend your hard-earned money.

Having never needed a service like this before puts you at a disadvantage. You want to know that you’re making the right decision by hiring one company instead of another. You’ll find out quickly how others perceive the company and its services if you spend time online and ask people their honest opinion about who you’re thinking of hiring to work on your water heater repair. In a matter of no time, you’ll have sorted through a list of companies that provide the service you need until you have one or two worthy candidates to hire.

The Best Water Heater Service Providers Do Things Differently

So, what constitutes excellent water heater repair services in Bedford, TX? It’s important to know what to expect from the best companies in the area. It sets your standards high and allows you to get the most bang for the buck for the service. When you take time to get to know the various options awaiting you for repairing your water heater, you make an informed decision based on facts, not emotions.

You don’t choose a company because you’re in a hurry to get the repair done. Instead, you select the best provider of service. The latter option makes it possible for you to get the help you need based on your expectations, rather than settle on the first service provider you find online. A company that cares about you and your household will be one that you feel good about calling in the future.

Here are some of the things that set one company apart from another when it comes to water heater repair services:

  • The amount of time it takes for them to respond to your request. When a company enthusiastically replies to your inquiry, you know it wants your business. You don’t spend hours playing phone tag. Instead, you can reach the company quickly and get your service call scheduled in record time. You’re never without the hot water needed to keep your home operating well. Instead, you get the repair done in no time and get back to business following your typical household schedule.
  • The way they speak to you over the phone and in person. When the customer service rep is polite and accommodating, you feel how the company operates. After all, it’s your very first impression of the water heater repair service provider. You feel more comfortable asking questions and getting the help you need with your requests.
  • How long it takes to complete the job. You can’t rush a good job. You can, however, hope that the service provider works efficiently. In doing so, you restore order to your home faster. You and your family’s schedules don’t get disrupted too much. A lack of hot water can make hygienic practices and household chores difficult to complete.
  • The number of options you get in how to fix the problem. If more than one solution exists, you’ll learn about them. The service provider offers the best solution to meet your needs. Instead of being given one option, you have several to choose from when they’re available.
  • The way the company seems to appreciate your business genuinely. When the water heater repair service provider thanks you personally, it gives you a favorable impression of the company. You feel valued and want to work with it in the future. If you know of someone who is having problems with their water heater, you recommend that they bring their business to the company you’ve hired. It’s a win-win solution for all parties involved!
  • How a company thanks you for being a valued customer. You probably remember a scenario where you weren’t treated as well by a company as you hoped you would be. Using that experience as an example of what you won’t tolerate, companies that treat you exceptionally well stand out. The water heater repair service that acts like you’re a VIP is one that you will want to use again when you need them. You know that even though it’s an expense to have work done on your water heater, you’ll get treated with care and respect, two things you definitely deserve!

Finding the perfect company to give your business to takes time and effort. It requires some research, which you can do in your spare time. If you need the services of a good professional, locating them before your water heater gives out is essential. That way, all you need to do is call the service provider and request an appointment.

Getting the issue resolved as quickly as possible works in your favor. It prevents you from losing more money on a costly repair that you could have avoided. It’s among the most important things you can do to keep more money in your bank account. Locating and hiring a water heater repair company that you know and trust is well worth the investment.

How to Get the Help That You Need with Your Water Heater When You Need It Most

Tioga Contractors takes good care of Bedford, TX residents. Not only do we offer fast and reliable services, but we make things as affordable as possible for you. When you need water heater repair, and more than one option exists, we offer it to you. That way, you have some say over how much you spend.

Call 469-598-0470 to set up a time and date to have your water heater worked on. The sooner you get the service call scheduled, the faster you’ll have access to hot water inside your home. If you’ve done without it for any length of time, you know how problematic it can be. Instead of wasting valuable time avoiding the expense, pay for and restore comfort to your home with every shower or dishwashing session you complete.

Photo By jjn

It would interest you to know that an average family wastes up to 180 gallons a week from household leaks. Most homeowners don’t even know there is water wastage occurring in their homes. Other than your habits, inefficient appliances are also one of the main culprits of water wastage. It is important to learn how a plumber installs and uses efficient fixtures and appliances that can help you conserve water, lower your bills and reduce your carbon footprint.

What Are Efficient Fixtures and Appliances?

Companies such as ENERGY STAR and the Environmental Protection Agency have developed a WaterSense standard that facilitates water usage efficiency in homes, businesses, and yards. These include plumbing fixtures you normally use in your home, such as showerheads, bathroom sinks, and toilets.

Tips on How to Conserve Water in Your Home

Using Efficient Fixtures and Appliances in Your Home

  1. Toilet

Toilets installed in Irving, TX before 1993 use up to 2 gallons more water whenever you flush than any newer model. Newer and more efficient toilets use about 1.28 to 1.6 gallons for every flush. Dual-flush toilets also use much less water compared to regular toilets due to their unique flushing technique.

Some of the most efficient toilets include:

  • Toto Drake II CST454CEFG
  • American Standard Champion 4 Right Height
  • Kohler K-3988-0Wellworth

2. Bathrooms

More than 15% of the water used indoors comes from faucets. By restricting flow, an average family can save up to 700 gallons of water yearly by restricting water flow. Often, a plumber may recommend a faucet with ceramic disc valves because it doesn’t rust or leak. Faucets can also be a design feature in your home, so finding the efficiency you want in a design you like is an added advantage. Some great water-saving models a plumbing professional would recommend include:

  • WaterSense line from Moen
  • Price-Pfister faucets such as Classic Centerset Bath Faucet and Kenzo Widespread Trough model
  • Kohler WaterSense certified faucet

3. Shower Heads

About 17% of your indoor water use goes to showering. Showerheads designed before 1992 had a flow rate of 5.5 gpm. This flow rate has been significantly reduced to 2.5 gpm. WaterSense Showerheads flow rates range at about 2gpm or below. As you may probably learn from an expert plumber, aerating showerheads combine water flow with air to increase pressure which offers a sense of fullness.

Some low flow showerheads often recommended by a plumber include:

  • Niagara N2915CH
  • Kohler Moxie Rainhead

Outdoor Water Use

Out of the 29 billion gallons of water used by households in the US, about 9 billion gallons are used for outdoor purposes. To incorporate efficiency and water-saving tactics outdoors, here are a few tips from our expert plumbers:

  • Incorporate a water-smart landscape that maximizes water efficiency while still offering curb appeal.
  • Learn how much water allows you to keep your landscape healthy
  • Consult a professional to install, maintain and review your irrigation system to ensure it is efficient
  • Adopt a WaterSense labeled controller
  • Instead of hosing your driveway, sidewalks, and steps, sweep them
  • If you have a pool, cover it to reduce evaporation when it isn’t in use

Turn Off the Tap While Brushing Your Teeth

It is easy to leave the tap running while brushing your teeth or washing your hands. If you want to conserve more water in your Irving, TX home, turning off the tap when brushing your teeth and washing your hands is one of the most basic water-saving ideas. This can save you up to 20 liters of water a day.

Only Run the Dishwasher and Washing Machine When Full

Both your dishwasher and washing machine consume a large amount of water. The fewer times you run them, the less water and electricity they will consume. A great strategy would be to wait until the washing machine or dishwasher is completely full before running a cycle. Not only does this help save water, but it also helps these appliances run more efficiently.

Also, scraping your dishes instead of rinsing them off before loading can help increase your water conservation. Purchasing a newer model washer can also help reduce your water consumption by 40% compared to the older models.

Check for Leaks

Did you know that a leaking toilet could waste up to 100 gallons of water daily? A great way to manage the amount of water consumed in a flush is to ask a plumber to install a cistern displacement device in the cistern. Also, check your washers for any leaks and have a plumber plug them.

Capture Excess Shower Water

Normally, when you put on the shower, the water is cold. You are then likely to leave the water running until it becomes hot. However, instead of letting the cold-water runoff, you could use a bucket to save it and later use it to clean the house or water your plants. Properly insulating your pipes would also ensure your water stays hot for longer.

Stop Using Your Toilet as a Dustbin

Most people tend to flush all kinds of things down their toilets. This leads to frequent clogging and gallons of water getting wasted. Instead, keep a dustbin in your washroom and use it instead of dumping everything in the toilet.

Only Water Your Plants if Needed

Don’t water your plants simply out of habit. Take advantage of the rainy season and avoid overwatering your plants. Not only does it cause water wastage, but it also leads to a loss of valuable nutrients. Before watering your plants, first, check.

Consult Tioga Contractors for Water Efficient Plumbing Upgrades

At Tioga Contractors, we are the leading plumbers in Irving, TX. We specialize in plumbing installation and repairs. Our team is dedicated to helping you save water and energy. Each plumber is well trained and equipped to deal with any plumbing issue you may be facing. Contact us today for more information about our services and more tips on how to conserve.

Photo By Ivan Bajic at istock

When it comes to your electricity most of us take it for granted. After all, we’ve lived with it all our lives and we’re used to being able to turn it on and off whenever we want. We’re used to lights, dryers, air conditioners, heaters, electric blankets, game systems, TVs, and so much more. And when those things go out, it creates a very difficult situation for us. That’s when you need an electrician.

When the Power Goes Out

If your power goes out the first thing you’re likely going to do is check with your city or another local area to find out if there’s a reason for it. The most common reason is that something has happened to an electrical box or power pole. This could be a car accident or a storm, for example, but it’s also possible that work is being done on the line causing the power to be out for a period of time.

If any of these things are the cause of the problem an electrician from your local area will take care of it and you won’t need to worry about calling someone yourself. But there are plenty of things that could happen that affect only your Arlington, TX home and are not related to the electricity at a place where the city is responsible.

An electrical expert will help you figure out the root of the problem and they can help you get the lights back on more quickly. All you have to do is make sure you give them a call as soon as possible. After all, no one likes to be stuck in the dark without access to the things that they need throughout the day.

If your power goes out, no matter what time of day or night, you want to know that you can contact a professional to help you get it back on again. That’s something you need to be prepared for right from the start. So make sure you know who you’re going to call if you ever have an emergency and need an electrician right away.

Not all electrical experts offer emergency services and you want to know that you are prepared with one who does. That way, your family is a whole lot better prepared for anything that happens.

Electrical Problems

If you notice any situations where your power seems to spike either up or down this is a sign that there’s something wrong. You’ll want to have an electrician take a look to see if there’s something that can be fixed closer to your home or if it’s something happening further out on the line.

You should also call an electrician if you notice that you blow a breaker frequently just using your electricity normally. You might find that using more than one appliance at the same time blows a breaker, or that using specific combinations of appliances in the same general area of your home blows a breaker. These are signs that there’s something more going on.

A professional can assist you with rewiring areas of your home, or upgrading wiring that is considered too old. For example, much older homes may still have what’s called ‘knob and tube’ wiring, which can actually be dangerous. Getting this replaced is better for your home and it’s more efficient as well.

Your electrical box is sort of the control hub for your Arlington, TX home when it comes to your electricity. This is something that needs to be well-maintained and may need to be checked if you notice problems with your electrical. They may need upgrading or replacing, especially if you’re doing a lot more electrical work in your home. Or you might need to add more breakers to an existing box for additional work you’re doing. A professional electrician will be able to help you decide what needs to be done.

Another feature you may need in your home is new outlets. Older homes that only have two-prong outlets can be upgraded. Or you could even opt for newer outlets that offer USB charging directly in the wall. There are a number of different ways that you can upgrade and improve your home if you’re interested.

Preparing for Your Needs

When it comes to getting prepared for an electrical appointment you want to make sure that you are calling a company that you can trust to get the job done for you. You want someone who is going to help you understand what you need and how they’re going to help you with it, and that means making sure you do the research.

Your home is important to you. You want to make sure that it’s always operating the way that you need it to. That means you definitely need the electricity to be functioning at all times. It also might mean adding in new lights, outlets, and switches where there weren’t any before. If that’s the case for you, it’s definitely time to call an electrician.

Getting Professional Help

The truth is, there are a number of different things that you may notice in your Arlington, TX home and reasons that you should call a professional electrician. If you notice anything that seems different from normal about your electricity you absolutely need a professional to assist you. That’s because electricity is extremely dangerous and requires an electrician to get it done right.

There may be some things around your home that you want to try out for yourself, but the electrical in your home should definitely never be one of them. Instead, you want to call Tioga Contractors. At Tioga Contractors we can help you take care of any electrical needs that you have. Whether it’s big or small, we can help you get your home functioning the way you need it in no time.

All you have to do is give us a call and we can come to you when it’s convenient, that way, your home can be running smoothly, faster.

Photo By andresr at istock

Anyone who ever had to deal with a sink that constantly leaks, or showers that run cold after five minutes, understands how invaluable a good plumbing company can be. Plumbing issues can happen at any time and often without notice. With this knowledge, we take pride in being a plumber that goes above and beyond for our Bedford, TX residents.

Customer Service You Can Count On

We’re a plumbing company that values every interaction with our customers. We also value interaction with our future or potential customers. It all counts. This is one of the many reasons why transparency and integrity mean a great deal to us. From the first time you reach out to us, we do our best to understand your issue and get one of our licensed and skilled plumbers out to your home or business. We understand that plumbing issues can be very inconvenient and costly. We also know that business owners who run into plumbing issues at their place of business want solutions that will allow them to quickly get back to normal.

We’re a plumbing company committed to resolving your plumbing issues quickly and efficiently. This often means that we may need to make service calls in the middle of the night or on holidays or weekends. However, this is all a part of our commitment to customer service. Our emergency service allows us to be there for our customers when they need us most. Our round-the-clock service allows both businesses and homeowners to get the help they need when they need it most.

Licensed and Skilled Plumbers

Our plumbing company takes pride in being an environmentally conscious company as well as being technologically advanced. Our plumbers/contractors have seen a little bit of everything. Our contractors utilize digital plans, eliminating a ton of paperwork and making it easier to relay information about different plumbing issues. Plus, we take pride in showing up on time and working quickly and efficiently to resolve your plumbing issues. Our plumbers utilize the latest GPS systems to help them show up on time and get the job done right.

Our Services

We take pride in being a plumbing company that has tackled and resolved many plumbing issues both big and small. We perform plumbing services that include sewer and drain cleaning, and water and sewer testing to list a few. However, our services don’t stop there. We also provide installation and repair of many plumbing appliances, water treatment systems, grease trap repair and installation, and site utilities. Of course, we also perform preventive maintenance for many plumbing issues as well. However, this detailed list of services doesn’t even begin to scratch the surface of our comprehensive menu of expert services. Our skilled technicians show up at your home or business, thoroughly assess the situation, and determine the best plan of action.

Great Service from a Skilled Team

We also keep our customers in the loop from beginning to end. We take the time to explain the issue to our customers, as well as the steps needed to resolve the issue. We also provide options and do all we can to meet both the needs and preferences of our customers. We are committed to meeting the needs of our customers. We are dedicated to keeping our promises. We are a plumbing company that takes pride in delivering the best plumbing service to our customers. We also take pride in being available to our customers rain or shine day or night. We are committed. Our company has been in business since the ’50s and we still take every promise we make, seriously. We know that it takes time, skill, and consistency to create a legacy of trust and excellence, but we’re here for it and always have been. We have a history of delivering on promises year after year.

We Do It All…

No plumbing job is too difficult for us. Our team of skilled plumbers has experience with a wide variety of different plumbing issues. Our contractors can perform plumbing services for ground-up construction, remodels, and additions for both commercial and residential properties. From simple leaks to expansive backflow issues, we get the job done right. We are happy to be the go-to plumbing company for many Bedford, TX residents. We know how powerful the right tools can be when you’re trying to resolve a plumbing issue. For example, our high-tech sewer cameras allow us to quickly find blockages. Our plumbers know what tools to use to resolve your issues, as well as when to use them.

Our Comprehensive Menu of Services

The world of plumbing has many moving parts. Luckily, our team of skilled plumbers understands how all of these parts are supposed to work together. Plumbing issues can range from simple to complex. However, we take both simple and complex issues seriously. A simple leak may be more annoying than serious, but we still work quickly to resolve your leak. Conversely, your shower pan may need repair, and your sewer line may be backed up. However, we dig in and go to work in the same dedicated way regardless of how minute or large the problems are. Basic services like sink and faucet installation, floor drains, and toilet installation and repair or examples of common plumbing services we perform. We’re a plumbing company that also deals with washer lines and tree root removal.

We’re here to meet all of your plumbing needs. Best of all, we provide service to a wide variety of customers. We can perform plumbing services for homes and businesses, multifamily buildings, and assisted living buildings. We really do it all. Plus, our menu of services is truly exhaustive because we do so much. If you are having any plumbing issues that affect your ability to run your business or your home, give us a call. We understand how a leaky faucet or a toilet that runs for hours can be both annoying and costly if neglected for too long. Our plumbing company serving Bedford, TX also knows that smaller issues can wear away at your peace of mind as both a business owner and a homeowner. Large or small, we at Tioga Contractors can resolve all of your plumbing issues.

Photo By PeopleImages at istock

Faulty wiring can lead to electrical fires, so you need to hire an electrical service in Bedford, TX, to fix it as soon as you notice the electrical issues. But that’s not the only reason for hiring an electrician. At first glance, the electrical wiring might seem like a cut-and-dry issue: the lights are either on or they aren’t.

In reality, though, the electrical service network that powers your home is vast and complex. A poorly designed circuit may send the wrong amperage to electronics and appliances, damaging them. A partially overloaded circuit may result in several electrical problems.

The lights may flicker when you use an appliance, or the circuit may shut down entirely if the fuse blows or the circuit breaker trips. You can avoid these and other electrical problems by hiring an experienced electrician.

Finding and Hiring an Experienced Electrician

Electricians often specialize in a certain aspect of electrical services. Some specialize in commercial projects; some focus on new construction. Others may exclusively handle service calls to repair faulty fixtures or dead outlets.

Those who concentrate on remodeling projects have mastered techniques for wiring an existing home, including snaking wires through existing walls, inspecting existing circuits, and figuring out whether the installation of an additional service panel is necessary to handle higher power demands.

General electrical service contractors typically have a team of reliable electricians. They may also belong to a home builders’ association that enables the contractor to access reliable material suppliers and several other benefits that enable the general contractor to provide excellent electrical repair and maintenance services.

Once the general contractor identifies the problem, they send over an electrician with the appropriate skills and experience to provide a lasting solution. Hire only licensed and insured electricians. Additionally, ask for references for previous clients or a portfolio of a previous job to get a sense of what to expect.

Qualifications for Home Electricians

Finding a qualified electrician is relatively easy because you can safely conclude that they’re at least competent if they have a Bedford, TX, electrical service license. Keep in mind, though, that there are at least two types of qualifications for electricians.

The first, a master electrician, is required to successfully complete two standardized tests and gain at least two years of experience. Master electricians fully understand the National Electric Code and know all the modifications that the state of Texas has made to it. For that reason, these electricians are qualified to design, plan, install and maintain an electrical wiring system.

The second type, the journeyman electrician, does not have all the qualifications of the master’s license. Nonetheless, a journeyman electrician has a Bedford, TX, license. In some states, they are required to work alongside a master electrician. By law, journeyman electricians cannot design and install wiring.

Judging the Quality of an Electrician’s Work

One way to judge the quality of electrical services is by the neatness of their work. Neater electrical service work is usually safer. For most residential wiring, several wires and cables run together near the service panel. Among the cables is the Romex, a flat, white cable with plastic sheathing. An experienced electrician will run these wires and cables in a neat, orderly way.

In contrast, jumbled or crossed cables that droop from joist to joist are indicative of an electrician who is neither methodical nor safety conscious. This is by no means nitpicking. It’s a lot easier to match circuit breakers and cables correctly when they merge systematically at the service panel.

Professional electricians also ensure that the cover plates on outlets and switches in living areas lie flat against the wall and sit plumb and square. To do so, the electrician sets the utility box (located behind the wall) at a proper distance and squares it up against the studs. In short, you want to hire an electrician who is meticulous about this work.

Working with an Electrician

For sizable remodeling projects, such as whole-house renovations and additions, general electrical service contractors from the plans of an architect or designer. The plans show the locations of switches and outlets and label different types of fixtures (e.g., incandescent, fluorescent). The architect or designer usually draws the plans long before you decide which light fixtures to use.

It’s a good idea to clue in your electrician on your choices. You can avoid any confusion by finding out when your electrician needs the fixtures and shopping around for them without actually buying them at first. Create a list of your preferred fixtures — including the names of the fixtures’ manufacturer, model, and vendor — and share it with the electrician for them to purchase the items.

You may not make any savings on the purchases if you have the electrician buy the fixtures for you because they’ll add a markup. However, the professional discount that electricians often receive will offset the cost, so you’ll end up paying roughly the same for the fixtures. The benefit of having the electrician buy the fixtures is that they assume responsibility for missing parts, defective products, breakage, and warranty issues.

Doing so also saves you from hassles such as having to pay a journeyman for a store run to purchase a missing screw. Furthermore, an electrician is more qualified than you to assess the quality of items on your list and steer clear of the low-quality ones. When it comes to electrical items, low quality usually translates to a safety hazard.

As for budgeting for fixtures, consider working with a lighting allowance in which you set an upper limit for the amount you intend to spend on lighting. If you exceed this amount, your electrical contractor will bill you for the overage (i.e., the extra amount you spent). If you stay under the limit, the contractor credits the balance back to you.

Electrical Repairs and Maintenance with Tioga Contractors

The condition of your home’s electrical system has a direct impact on your comfort and safety. So you want to be sure it’s always in good condition. Whether you need electrical repairs, maintenance or an electrical service contractor for a remodeling project, hiring a licensed, insured electrician with extensive experience ensures you have a safe, efficient system. Call Tioga Contractors today to schedule an appointment.

Photo By ungvar at Shutterstock

Electrical work should be left to professional electricians. Many people like DIY projects and homeowners frequently handled electrical work in the past. Our homes have much more complex electrical systems now than ever before. The difference between current homes and a standard home just 30 years ago is huge.

Electricity powers so many appliances, entertainment devices, power tools, and other electronic gadgets that our homes really wouldn’t function well without intact wiring and a reliable source of electricity. There’s a good chance that we’ll use even more electronic devices in the future, so hiring an electrician and investing in a home’s electrical system is a good bet. Upgrades can be extensive if you want whole-house rewiring or general updates, but you can also choose to have a few smaller improvements done to enhance daily life or increase the value of your home in Irving, TX.

A Finished Basement

Turning an unfinished basement into a finished room offers plenty of opportunities for your family and increases the value of your home. Call an electrical service to assess and wire the basement. A new sub electrical panel may be necessary as well. Ask your electrician if other maintenance tasks or upgrades, such as a new control panel or replacing older wiring in other areas of the house, can be handled at the same time. A new electrical panel may be necessary if you’re planning to install new appliances or devices that use a lot of power. This is even more important if you live in an older home that still has the original electrical panel. A panel installed in the 1980s wasn’t expected to handle anything like the amount of electricity we use today.

Smoke Alarms

Although it may sound strange, electricians across the country actually get a lot of calls about smoke detectors. Many of these calls resulted from unsuccessful attempts to reset the device. A malfunctioning smoke detector isn’t safe, and it’s also quite aggravating. High-pitched that doesn’t stop making it nearly impossible to concentrate on anything. Sleep is out of the question. However, leaving the smoke detector disconnected to shut off the noise is very risky.

The first step in resetting most smoke detectors is cutting off power sources. Some devices are plugged into an outlet, but most have batteries as a backup or primary source. Unplug the device and remove any batteries. Hold the reset button until the capacitor is completely drained. Put brand new batteries in the device and turn it back on. If this doesn’t work, you can replace the old model with a new unit or contact an electrician to see if the unit can be repaired.

Smoke alarms aren’t the only essential safety feature you should have. Carbon monoxide detectors are also very important. Every home should have at least two carbon monoxide detectors. Keep at least one device in a common area and make sure each bedroom has its own alarm as well. Check your alarms regularly to make sure they’re working correctly. Your electrical professional can also check carbon monoxide alarms.

GFCI Outlets

Electricity traveling to the ground through an unintended route is called a ground fault. GFCI, or ground fault interrupter, outlets contain safety features that shut off the flow of electricity when the outlet detects a difference between input and output currents. Electricity always flows through the path of least resistance. Wires are covered with rubber or plastic to keep electrical currents in the intended path to switches and outlets. Damaged wires can let the current escape, which may lead to fires or electrical shock. The risk is higher in locations where water and electricity are in close contact. Homes should have GFCI outlets in bathrooms, basements, kitchens, laundry rooms, garages, and outdoor areas.

Lighting

New light fixtures are a relatively small project that offers outsized benefits. Although replacing a light bulb isn’t difficult, installing a new fixture is a different matter. It’s easy to get confused if you run into wiring issues, and any mistakes will probably lead to a call to your electrician anyway. Mistakes can also lead to short-circuits and potential fire hazards, so it’s much easier to have a professional installation in the first place. You can choose from all sorts of lighting options such as LED bulbs, recessed lighting, dimmer switches, or ceiling fans.

Outdoor Projects

Other outdoor projects that add value to your home include exterior lighting and patio heaters. Some homeowners even have outdoor kitchens installed. The long stretches of warm weather in Irving, TX, let you cook outdoors quite frequently. Outdoor kitchens can be as simple or extensive as you want. Some people choose basic things like grills and a small fridge or cooler, while people that really enjoy entertaining outdoors can choose stoves, freezer and refrigerator combinations, smokers, and even bar units with everything needed to serve mixed drinks. Hot tubs are very popular as well. These appliances and devices use a lot of power, so you should contact an electrician for help with the project.

If you’re considering a new electric car in the future, you’ll need a car charging station. This is also something to think about if you plan to put your home up for sale. An electrician can install a 240-volt car charging station outlet in your garage while minimizing drywall damage and other disruptions.

Surge Protection

Every home should have house-wide surge protection. Power surges can destroy expensive appliances such as refrigerators and dishwashers, and other devices including televisions, computers, game systems, and all the other electronics found in modern homes. Surge protection can be installed when you need electrical work done for some other purpose too. You can also choose to install protective units for phone or cable systems. The NEC national codes may require surge protection in all new homes sometime in the near future. You can also choose to install protective units for phone or cable systems.

Contact Tioga Contractors to schedule a consultation. The experienced electricians at Tioga can help plan renovations or install new features in your home in Irving, TX. They can also handle routine evaluations and repairs to make sure your electrical system is safe and efficient.

Photo By sockagphoto at istock

The water heater is an integral component of indoor plumbing in most, if not all, Arlington, TX homes. This appliance ensures that your home has an adequate supply of clean hot water for various chores in your household. But like any other mechanical and electrical appliance, your water heater can develop problems that can affect its performance, interrupt the supply of hot water in your house, and even put your family in danger. Although modern water heaters are quite complex appliances, it is not hard for you to tell when yours has a problem. However, this does not necessarily mean that it is easy for your to diagnose and fix the underlying cause of any particular water heater problem. Therefore, you need to be in touch with a professional plumber you can call when you need the services of a water heater repair expert. Below is a rundown of the signs that should prompt you to call a professional water heater service.

No Hot Water

As mentioned above, your water heater is essentially supposed to ensure that your house has a constant supply of hot water. Therefore, if you wake one morning only to realize that you do not have hot water in your house, then you could be facing a major water heater failure. This problem can be caused by several issues. For instance, if your water heater is not heating water at all, it is likely that there is an electrical fault. Your water heater can also fail to heat water if its heating elements have been damaged. Whatever the underlying cause of the problem might be, you will need a professional water heater repair expert for diagnosis and repairs. These professionals deal with such issues every day, and it will not be too difficult for them to determine why your water heater is not heating water and provide a decisive solution to restore the supply of hot water in your house.

Water Heater Noise

Of course, water heaters are not designed to run completely silently. However, the sound of your water heater should tell you something about its condition. If you have used your water heater for more than a few months, you definitely know its natural sound, and it is nothing to be worried about. However, if it is producing unusual noises, such as popping, cracking, or hissing sounds, then you might be facing a serious water heater failure. For instance, popping and cracking sounds might point to the presence of too much sediment at the base of your water heater’s tank. The sounds usually occur as sediments crack and collide against each other or even against the walls of your water heater’s tank. Although this noise is harmless, the buildup of sediments in your water heater can negatively affect the performance of your water heater. For instance, if sediments cover the heating elements, your water heater might fail to heat water quickly, meaning that it might consume more energy than necessary. To prevent such an eventuality, it is imperative for you to ensure that you call a professional water heater repair expert as soon as you notice that your water heater is producing popping or cracking sounds.

The Hot Water Is Too Hot

The fact that your water heater’s job is to heat water doesn’t mean that the water coming out through the hot water outlets should be boiling. This is because water at extremely high temperatures can be dangerous. Therefore, your water heater is designed to ensure that the water it gives you is heated moderately. Therefore, if the hot water in your kitchen or bathroom is too hot, then there is a problem since it could potentially hurt you and your family. In most cases, this issue can occur due to the thermostat’s failure to regulate how hot the water gets. As such, if the water coming from your water heater is too hot, your water heater repair expert should assess the condition of your thermostat. If its settings are correct, then the thermostat could be broken, and your water heater expert should advise you on whether it should be repaired or replaced.

Frequently Running Out of Hot Water

As long as your water heater is operating optimally, your house should have a constant supply of hot water. Therefore, if you keep running out of hot water, then you could be facing a serious water heater problem. The issue can occur due to several reasons. For instance, if there is too much sediment in your water heater’s tank, its capacity can get significantly reduced, meaning that you will start running out of hot water more frequently. To prevent such an eventuality, you will need to work with a professional water heater repair expert to ensure that your water heater is drained regularly. You can also start running out of hot water more frequently if the demand for hot water in your house has suddenly increased. In such a situation, you will need to talk to your water heater repair expert about the need to replace your smaller water heater with a bigger one. Alternatively, you can decide to invest in a tankless water heater to save space and still ensure a constant supply of hot water in your home.

The Bottom Line

Overall, it is apparent there are many mechanical and electrical water heater problems you can face as a homeowner in or around Arlington, TX. However, given the complexity of a water heater, it is not easy for you to diagnose and fix most water heater issues on your own unless you are a professional water heater repair expert. Therefore, you need to be in touch with a professional plumber you can trust to help you with all your water issue issues. If you are looking for a reliable plumber providing water heater repair services in Arlington, TX, Tioga Contractors is the answer. Feel free to contact us today for more information about our company and water heater repair services.

Photo By Tero Vesalainen at Shutterstock

Plumbing pipes are a vital part of the piping system that consists of pipes, valves, and fittings installed to distribute water to a Hurst, TX, home or discharge waste to the septic or sewer systems. The plumbing market offers different pipes for hot and cold water supplies.

The pipes include PVC, Chlorinated PVC, copper, galvanized steel, PEX, poly, and Kitec. Issues in the pipes manifest differently and sometimes produce sounds that a plumber can look into to find the underlying problem. Some of the plumbing pipes noises are not limited to:

Banging Sounds

When the water lines in your home produce banging noises, it can be a sign of a severe problem that requires prompt fixing. The strange sound can be due to some of the signs discussed below

High Water Pressure

Too much pressure in the pipes can make the water pipes make banging sounds. The issue is frequent in old homes without a pressure regulating valve. The best solution is to get a plumber in Hurst, TX, to install a pressure regulator that allows water to flow at 60 pounds per second recommended for households.

Water Hammer

It is an issue that occurs when a sudden shutting off of water makes the water slam on the shut-off valve. The problem can harm the piping connections and joints. A professional inspects the pipes for vibrating parts, the air chamber near the faucet that absorbs the shock when high-pressure water suddenly stops.

Copper Pipes

The water lines are notorious for generating banging sounds when supplying hot water. Hot water makes the pipework expand and can rub the nearby structures if they are in a tight area, hence the banging noise.

The hired plumber can recommend lowering the hot water temperatures to reduce the expanding and contracting of the pipes.

Gurgling Noise

Homeowners can also complain of gurgling sounds from their water lines. The noise is a sign of an underlying issue that requires the expertise of a plumbing professional for thorough inspections of the piping system. The irritating noise is a sign of a clog in the pipes.

The causes of the obstruction in the water lines include mineral buildup from hard water. In the drains, the blockage can result from flushing non-flushable items, soap scum, large particles, or pads down the drainage systems. The solution to the gurgling noises is calling a plumbing company that identifies the clog and clears it from the pipes to allow free flow of clean water to your faucets and wastewater out to the septic systems.

Whistling Sounds

Squealing or whistling sounds can also emerge from the pipes, indicating a problem. The issue may be due to small components that facilitate the efficiency of the plumbing valves and faucets. You might notice a whistling noise whenever you use small plumbing components because of worn-out or broken washers.

So, whenever you use your dishwasher and hear the squealing sound, the best step is to call a plumber to check the system, identify the problem, and fix it.

Another cause of the sounds is water forcefully moving into a narrow opening because of high water pressure or the water flow rate. The hired plumbing expert can solve the problem by reducing the water pressure to the water velocity.

Humming Noises

People that rely on well water can also hear humming sounds from the water distribution pipes. The noises may be due to vibrations caused by high water pressure beyond the system’s capacity.

A failed or damaged washer in the piping system can make the humming sound as water flows to your faucets. Getting a professional plumber is appropriate to check the washer and the water pressure to ensure they are in good working condition. If the issue is a worn-out washer, the plumbing service provider is well-equipped to replace it skillfully.

Knocking Sounds

The unusual knocking sounds can also indicate an issue in the water lines. You will hear the knocks in the system when cold water is flowing with high pressure. It is an easy fix, as the plumber will adjust the pressure values to ensure they are within the optimal range of between 40 pounds per square and 60 psi.

The knocking sound can also emerge due to sediment building up in the water lines because of hard water. The accumulated mineral sediments are easy to remove by cleaning the pipes and installing water softeners.

Preventing Plumbing Pipes Noises

Routine Maintenance

Since most of the issues leading to the noises are either loose parts, clogs, worn-out parts, or failing components, the best way to prevent the sounds is to have a qualified plumber tune up the piping system regularly.

The experts use their advanced tools and skills to inspect the entire water and drain pipes for potential problems and fix them promptly. Cleaning the pipework to clear a clog and tightening the loose valves or parts in the water and drain lines is also part of the system.

Regulating Water Pressure

Most of the above sounds are a result of high water pressure. For that reason, a plumber can help you regulate pressure and install the pressure regulating valve in your home if the piping system does not have one.

In the presence of a water pressure regulator, the plumbing professional can ensure the pressure is within the optimal range to prevent numerous sounds from the water lines.

Here for Professional Help!

Never ignore noises from the pipes because they alert you of a plumbing problem that requires immediate repair services. Getting thorough inspections of the pipelines is essential, and you should call Tioga Contractors in Hurst, TX, for a competent plumber to schedule the checkup.

We are a family-owned and operated plumbing company providing residential and commercial plumbing services since 1953. Staffed with qualified and trained employees that comply with the highest ethical standards, our full-service business is ready to address all your plumbing concerns, including finding the root cause of the problem for proper repairs or replacements.

Photo By Panaiphoto at Shutterstock

One of the first impressions you receive from home is its curb appeal. Most people boost their curb appeal to sell their houses quicker. However, outdoor lighting trends are not only aesthetically pleasing but also ensure your home is secure. With the right electrical contractors, outdoor lighting can be an asset to your property.

Why You Should Add Outdoor Lighting to Your Property

Here are a few reasons why you should consider outdoor lighting for your property:

They Improve Safety and Security

An unlit property poses several safety risks. First, it poses a tempting opportunity for burglars to prowl about your property. A well-lit property helps deter criminals from attempting to steal your car or enter your home. Dark stairs and walkways also make it hard for family and visitors to see where they are going and may even trip and fall. Well-installed outdoor lighting around your front steps and patio enhance safety and give your space a rich feel.

Motion sensors are used to light the way for a homeowner taking out the trash or even visitors looking to enter your home. However, they are also a great deterrent for unwanted intruders since they can illuminate all the dark corners of your property.

Offer Elevated Aesthetics

Outdoor lighting doesn’t need to be harsh or utilitarian. Your Arlington, TX property can look soft and inviting when done using professional electrical contractors. You could consult a landscape lighting designer to design an outdoor solution that works with home and the outdoors.

Strategically positioned lighting can add depth, highlight beautiful features and create an alluring ambiance. They can also be used to highlight the beauty of a pool and highlight tree silhouettes.

They Help Illuminate the Way

Outdoor lighting offers you the choice of installing path lights to illuminate the way to the door and avoid the risk of tripping. They can also be used to mark boundaries such as the driveway to help a driver see better. Path lights come in various styles to match the style of your home. They can either be below on the ground or raised on posts. Since it doesn’t snow much in Arlington, but it rains heavily, you may consider having electrical contractors install your lights on posts.

Increased Home Value

Professional outdoor lighting can add value to your home in many ways. It can enhance design elements, make your space look larger, increase the usability of your outdoor spaces after dark and add beauty. It is also one of the best ways to impact the value of your property. An added coat of paint and well-positioned lighting can increase the value of your home.

Increase the Usability of Your Outdoor Spaces

There’s no better place to relax, entertain and explore than your own front or backyard. Whether it’s a bonfire with friends or a barbeque under the stars, a well-lit outdoor space with the help of expert electrical contractors can set the tone for wonderful experiences.

5 Outdoor Lighting Trends to Enhance Your Outdoor Space

Low Voltage LED Lights

Instead of using incandescent lights, use low voltage LED lights to create or enhance focal points such as decks, swimming pools, fire pits, patios, and fountains. Did you know that LED lights use 75% less energy than incandescent lights and last almost 25 times longer?

During the holiday season, you can also use different colored LEDs to create a holiday mood and as a form of decoration as well.

Smart Security lighting

You can take the security of your home a notch higher by adopting smart security upgrades instead of traditional security lighting. While traditional security lights installed by electrical contractors are mounted on walls and go off when there is movement, smart security lighting allows you the ability to control your lights at the touch of a button on your phone. If an animal has triggered the lights, you can easily turn them off, adjust the lighting and even use voice control to operate the lights.

Path Lights

You can use stylish LED lights to illuminate your pathways. They do not need fancy wiring, are easy to push into the ground, and produce dim lighting that doesn’t cause glare or result in light pollution. If you are an eco-friendly enthusiast, you can consult electrical contractors to adopt solar-powered lighting that is eco-friendly and energy-efficient.

Landscape Light Fixtures

Light fixtures installed around shrubs, trees, and other landscapes can help accentuate the décor and plants in your yard. A great way to adopt this would be to add ornamental décor that glows in the night and add lighting to your trees and shrubbery. Lanterns can also help you make the most of your yard.

Lighting for the Stairs and Deck

To avoid tripping on the steps at night, electrical contractors can add lighting to your stairs and deck. You can also angle some of the lighting in your yard to light up these areas. Often, lighting for these areas is usually embedded into the concrete. If your stairs or deck are already built, you can attach your lights to the platform or the ground around.

String Lights

You’ve probably seen string lights on a restaurant patio, and their effect on a space is undeniable. You can easily have this ambiance on your front porch or backyard. Hang string lights around or near your outdoor seating in your yard. This may be on trees, poles, or the balcony. Ensure they are waterproof, solar-powered, and long-lasting to get the most use out of them.

The Best Electrical Contractors in Arlington, TX

Undoubtedly the leading electrical contractors in Arlington, TX, Tioga Contractors deals with all electrical services, including electrical wiring, light installation, TV installation, and repairing A/C and heating circuits, among many other services. We are always constantly adapting to new technologies and are equipped with the correct tools and the right attitude to deal with any electrical issue you may be facing. Get in touch with us today for more information about our services.

Photo By Vach cameraman at Shutterstock