5 Issues That Require A Water Heater Repair Specialist | Irving, TX

You need hot water to perform many daily tasks, including cooking, cleaning, and showering. Your hot-water-based appliances also need hot water to do their job efficiently. The water heater in your Irving, TX home heats and stores hot water, so it’s there when you need it. If the water heater isn’t working correctly, it can affect the temperature of the water and can make the hot water unsafe for use.

Ignoring water heater issues will cause the problem to escalate over time and could result in a complete breakdown.

If your water heater experiences any of the following problems, it’s best to schedule an appointment for water heater repair right away.

#1 Moisture or Water Pooling Around the Unit

The area around the water heater in your home should always be dry. If there’s moisture on the walls, floor, or the unit, you should call a plumber specializing in water heater repair. When a cracked, loose, or disconnected hose can create moisture in the area, resulting in water damage and mold growth. Although this is a pretty easy fix, you should have the problem resolved quickly to avoid the cost of repairing the water damage and eradicating the mold.

If there’s water pooling around your unit, it’s best to schedule an appointment for an emergency water heater repair. The pooling water indicates a crack in the water tank, which could cause 50+ gallons of water to flood your home, causing considerable damage to your home and belongings. A plumber cannot fix cracks in the water tank, and you will need to replace it.

#2 You Run Out of Hot Water Often

It isn’t uncommon to run out of hot water when your family uses too much hot water in a short period of time. You will need to wait for the water tank to refill and then for it to heat up.

If you run out of hot water frequently and someone new has recently moved into your home, the water tank may not be large enough to meet your family’s hot water demand. A professional plumber can install a unit with a larger tank or a tankless water heater that provides hot water on-demand.

If nothing has changed in your household and you run out of hot water frequently, sediment could be to blame. Over time, large pieces of sediment can form in the tank, reducing the space available for hot water storage. A plumber can try to flush the unit; however, you will have to replace the water heater if they can’t.

#3 No Hot Water

A lack of hot water is a significant problem because you need hot water every day. You may need to call a plumber specializing in water heater repair, but before you make the call, you should check a few things to avoid an unnecessary service call.

First, check the fuel supply. If you have an electric water heater, make sure the unit has power. If you have a propane or oil-fueled water heater, make sure there is fuel in the tank, and the pilot is lit. If you have a natural gas model, make sure your gas bills have been paid and check with the gas company to rule out a widespread outage. If everything checks out on your end, it’s time to call a plumber specializing in water heater repair.

The most common cause is a broken heating element, and the unit cannot heat the water. If your unit is over ten years old, it may have reached the end of its lifespan and needs to be replaced.

#4 Lukewarm Water

Lukewarm water is frustrating because nobody wants to take a lukewarm shower. If you allow the water to run for several seconds and it isn’t getting hot enough, check the unit’s thermostat. The EPA recommends keeping the thermostat set to 120 to 140 degrees, which is hot enough without creating a scalding hazard. If the thermostat is set correctly, you should schedule an appointment for water heater repair.

If the thermostat is broken, the water heater won’t get the correct signal and can’t heat the water to the desired temperature.

If you have a water heater with two heating elements, one of the elements may have failed, and the other one isn’t powerful enough to heat the water in the tank to the desired temperature.

If the water heater in your home is over ten years old, it can’t function efficiently and won’t heat the water to the desired temperature.

A plumber can inspect the unit to find the cause of the problem to make the necessary repair or replace the unit.

#5 Banging Sounds Coming From the Unit

If you hear something banging in the water heater, it’s best to call a professional in water heater repair right away. Banging sounds indicate sediment in the water tank, and when large pieces form in the tank, they can bang against the sides. Ignoring the problem isn’t an option because the sediment can crack the tank, causing a flood in your Irving, TX home.

A plumbing professional can try to flush the sediment; however, you will need to replace the water heater if they can’t.

Call Tioga Plumbing & Electric Today

If the water heater in your Irving, TX home isn’t working correctly, and you need to schedule an appointment for water heater repair, call Tioga Plumbing & Electric. We are a full-service plumbing and electric company, serving customers in the area since 1953.

Our plumbers are professionally trained, highly skilled, and passed a background check and drug test before they are hired. They have the knowledge and experience to handle all plumbing jobs.

When you schedule an appointment with us, the plumber will arrive in a fully-stocked truck, allowing them to make most repairs on the same day.

We are members of the Plumbing Heating Cooling Contractors Association and are an Accredited Business with the Better Business Bureau. In addition, Home Advisor lists us as a Screened and Approved, Top ate Elite Service, and in 2017, we were their Best Of winner. In addition, we have a 5-star rating on Google and Customer Lobby and several positive reviews on Yelp.

To schedule an appointment for water heater repair or any other plumbing or electrical service, give us a call or book online.

Photo By OlgaMiltsova at istock