8 Most Common Plumbing Problems That Require a Professional Plumber | Plumber in Arlington, TX

8 Most Common Plumbing Problems That Require a Professional Plumber | Plumber in Arlington, TX

Photo By kurhan at Shutterstock

There is a variety of plumbing issues that are experienced by home owners. These plumbing issues vary in terms of magnitude, complexity and costs. There are some minor plumbing problems that can be solved with DIY methods. However, there are some plumbing problems that can only be solved by a professional plumber in Arlington, TX.

In this article you will discover a variety of plumbing problems, only a professional plumber in Arlington,TX can handle and solve.

Let’s take a look.

1. Slow Draining Sinks

There are times, when the water sinks take longer than usual to drain. This normally happens due to a blockage in the pipes under the sink that restricts the flow of water. If it is a kitchen sink, the pipes can get clogged by small crumbs of food that go into it when you wash the dishes. In the case of bathroom sinks, the blockage happens due to knotted hair and soap. There are several ways of dealing with such problems. Such clogging can be solved by pouring in baking soda, vinegar or a drain opener. However, it is best to call a professional plumber in Arlington, TX. If the clogging is neglected, it will worsen with time.

2. Dripping Faucets

Dripping facets are so common, that it is impossible to find someone who hasn’t experienced this problem in their homes.  Not only does the sound of dripping faucets is annoying, but also wastes water thus costing you money. A faucet that is dripping can waste around a thousand gallons of water on an annual basis. The reason why faucets drip is the stiffening, and wear and tear of the washer inside the faucet. It is beyond the skills of a homeowner to get rid of dripping faucets. However, a plumber in Arlington, TX can fix dripping faucets with ease.

3. Clogged Shower Drain

Bathroom sinks aren’t the only ones to get clogged, shower drains also get clogged. Shower drains get clogged because of soapy water and knotted hair that go into it. Normally, opening a shower clog requires plunger or snake. It can also be done with baking soda or vinegar. Similar to sink clogging, clogged shower drains will get worsen due to negligence. If you are using a plunger, try using petroleum jelly at the end of the suction pad. If the problem doesn’t go away, maybe it is time to call a professional plumber in Arlington, TX.

4. Toilet Clogging

If the toilet bowl fills up to the brim and doesn’t drain, there is a good chance that clogging has taken place. This clogging happens due to pieces of tissue paper you try to drain and pieces of human waste. Toilet drain can easily go away with a plunger. If the plunger does not work, try using a drain auger. If none of the techniques work, only a professional plumber in Arlington, TX can absolve you of this problem.

5. Constantly Running Toilet

The worst thing about a running toilet is the wastage of water. Running toilet can waste around 200 gallons of water a day. The faulty flapper valve is the culprit behind running toilets. It is responsible for controlling the water that passes from the tank to the valve. However, there is nothing to worry about. You can fetch a toilet repair kit from any nearby hardware store, and get rid of the issue. And if that fails to work, a professional plumber in Arlington, TX can make the problem go away.

6. Defective Water Heater

This problem is one of the most annoying ones, and the interesting part is that detecting is hard. This problem can only be discovered when you are in the shower. While you are shower, the water will turn cold, leaving you shivering. There are several reasons behind a defective water heater. Normally, it happens due to the pilot that goes out and need to be lit again. The buildup of sediments in the tanks can result in a faulty water heater. A thermostat that doesn’t function well might affect the functioning of the water heater. Only a professional plumber in Arlington, TX can fix something as complex as a faulty water heater.

7. Reduced Water Pressure

There are times when the water pressure from the tap or the shower slows down. Washing things down or taking a shower becomes difficult when the water pressure is hindered. When this happens, chances are that a leakage has sprung out. Corrosion is one of the most common reasons behind pipe leakage It also happens when mold has found its way in. Water pressure, also slows down when sediment has build up in the pipes and hinders the flows of water. To restore the pressure of water, the plumbing must be checked by a professional plumber in Arlington, TX.

8. Leaky Pipes

Leaky pipes are nuisance, which almost every homeowner experiences in his life. Not only do leaky pipes result in water wastage, they can also open the doors up for several other problems. One of the worst things about leaky pipes is the dampness they cause. Dampness paves the way for microorganisms, which give birth to mold damage. Mold ruins the structure of your house, as well as your health. Furthermore, leaky pipes allow cockroaches and other creepy crawlers to infest your house and harm your health. Detection and repair of leaky pipes is a challenging task not everyone is capable of doing. Only a professional plumber in Arlington, TX can effectively investigate the cause of the issue and get rid of it.

These are some of the plumbing problems which are not to be taken lightly. The moment you notice any one of them, you first impulse should be to call a reputable plumber in Arlington, TX. If you are experiencing any of the abovementioned plumbing issues in your home, do let us know. Have a good day!!