Plumbing woes are an inevitable part of home ownership. While some issues come with normal wear and tear on plumbing equipment, others can result from human error. Plumbing problems can be frustrating, messy, and expensive, so it’s essential to know how to prevent them in the first place.
The best way to prevent plumbing troubles is to have a licensed plumber inspect your plumbing system regularly. At Tioga Contractors, we have been helping businesses and homes in Irving, TX, with their plumbing needs for over 20 years. Our professional plumbers have the experience and knowledge to identify potential problems before they become expensive repairs.
Here are some of the most common plumbing problems that Irving, TX customers call us for:
Leaky pipes and faucets are one of the most common and costly plumbing problems. Even a tiny leak can waste a lot of water and cause damage to your home. Some of the causes of leaks include:
-Worn-out washer or O ring
-Cracks in pipes or fixtures
-Incorrect pipe laying
-Pipe joint damage
-Excessive water pressure
-Cracked seals or cracked pipes
-No matter the cause of the leak, it’s vital to let a licensed plumber fix leaks as soon as possible. The longer you wait, the more damage it may cause to your home and plumbing system.
#2. Slow Drains
Drainage issues can cause health hazards and damage your home if left unaddressed. If you’ve noticed that your drains are draining slower than usual, it may be due to hair, soap, and other foreign objects that have built up over time. Routine drain cleaning is usually enough to address this issue.
Multiple slow or clogged drains in your home can be caused by a blockage in your main sewer line. This can cause sewage backup and flooding in your home. So be sure to call a plumber if you suspect a blockage in your main sewer line.
#3. Burst Pipes
Burst pipes are one of the most severe plumbing problems since they can cause extensive water damage to your home. Some of the most common causes of burst pipes include:
-Old or damaged pipes
-Excessive water pressure
-If you have a burst pipe, shut off the water to your home and call an emergency plumber as soon as possible. They’ll come to your rescue, repair the burst pipe, and help prevent further damage to your home.
#4. Running Toilets
Running toilets can waste a lot of water and increase your water bill. It’s estimated that a running toilet can waste up to 200 gallons of water per day! That’s a lot of water and money down the drain. In most cases, a running toilet is caused by:
-Corroded toilet handles
-Refill tube problems
-Worn out flapper seals or flush valves
-Improperly sized flapper chains
#5. Low Water Pressure
If you’ve noticed that the water pressure in your home is lower than usual, there are a few possible explanations. In some cases, low water pressure is due to a sediment buildup in your pipes. This can happen over time as water flows through your pipes and leaves behind deposits of minerals.
A problem with your water main can also cause low water pressure. The problem may be on the city’s end if you have a municipal water supply. However, if you have a private well, the problem is likely with your water well pump.
Another common cause of low water pressure is a leak in your pipes. Even a small leak can cause a decrease in water pressure. No matter the cause of your low water pressure, it’s best to call a plumber for help. Experts can quickly diagnose the problem and get your water pressure back to normal.
#6. Water Heater Issues
Water heater problems are another common plumbing issue. With time, sediment can build up in your water heater and cause it to become less efficient. A broken heating element can also cause water heater failure. This is normally caused by a buildup of sediment that prevents the heating element from functioning correctly. Other causes of water heater failure include:
-Loose or broken electrical connections
-Improper water heater installation
-Water heater problems can lead to higher energy bills and, in some cases, complete failure of the unit. Have it serviced by a licensed plumber to keep it running smoothly.
#7. Sump Pump Failure
Sump pumps are an essential part of your home’s Plumbing system. They’re typically installed in the lowest part of your home, such as the basement, and are used to pump water out of your home to prevent flooding. Sump pumps can fail for many reasons, including:
-Clogged discharge pipes
-Wear and tear
-Improper sump pump installation
-Aged sump pumps are prone to failure
-A professional can help you troubleshoot the problem and get your sump pump working again.
#8. Jammed Garbage Disposal
Garbage disposals make cleanup after meals much easier, but like any other Plumbing fixture, they can break down over time. This can happen for many reasons, including:
-Stringy or starchy foods, such as celery, onions, or potato peels getting caught in the blades
-Foreign objects stuck in the disposal
-Hardened grease or fat
-A buildup of food particles
-If your garbage disposal is jammed, don’t try to fix it yourself. Plumbing repairs can be dangerous, and garbage disposal is no exception. Thus, call a professional plumber to have your disposal repaired or replaced.
Tioga Contractors Can Help You Fix All Your Plumbing Problems
No matter what Plumbing problem you’re facing, the experts at Tioga Contractors can help you quickly uncover the cause of these common plumbing issues and recommend effective solutions. We have years of experience helping homeowners in Irving, TX, and the surrounding areas with all their Plumbing needs. Our plumbers are highly trained, licensed, and insured and can handle any plumbing repair, installation, or replacement.
So, if you’re dealing with any of these Plumbing problems or any other plumbing issue, call Tioga Contractors today at 469-789-1293 to schedule a consultation.
Photo By Love the wind at Shutterstock