Common DIY Plumbing Mistakes Everyone Must Avoid | Plumbing Repair in Bedford, TX
Photo By oldbunyip at Shutterstock
A plumbing repair in Bedford, TX seems like an easy DIY job. All you need is a toolkit, a can of grease, and some plumbing tape. DIY methods of plumbing repair are easy, but they are ineffective in the long run. Before you fix a problem, you need to know the reason behind the issue. Furthermore, you need to know all about the different kinds of pipes, joints, and other plumbing appliances. A lack of knowledge can make you mess up the whole process, thus costing you a great deal of time and money. On the other hand, a professional plumber stays informed and up-to-date about the plumbing technicalities, which allows them to discover problems and come up with just the right solution in a jiffy.
Here are some common mistakes to avoid when applying DIY methods of plumbing repair in Bedford, TX.
Over-Tightening the Connections
One of the most common mistakes people make while trying to handle plumbing repair in Bedford, TX on their own is over-tightening the connections. When you tighten the pipes, elbows, and tubes too hard, chances are that you will damage the entire fitting. Remember, that these cracks and breakings will not occur immediately, but using excessive force will allow the fitting to weaken and eventually crack over time. These cracks will result in leakage and flooding.
Using the Wrong Tape
Another common DIY mistake people make during a plumbing repair in Bedford, TX is using the wrong kind of tape. They use normal house tape instead of a proper plumbing tape, which fails to keep the pipes in place. Furthermore, even if they use the right tape, they use it the wrong way. Plumbing tape is supposed to be applied in a clockwise direction, and DIYers often apply the plumbing tape the other way round. Consequently, their entire effort goes to vain and the project results in a failure.
Using Drain Openers
When it comes to plumbing repair in Bedford, TX, the most common plumbing issue is clogging of the drains. The easiest way to deal with this problem is by using a plunger. To make things simpler, removal of the P-Tarp and pouring out the clog is a safe option to consider. DIYers make the mistake of reaching out for a drain opening chemical.
Here are some reasons why using a drain opening chemical isn’t the best choice when it comes to plumbing repair in Bedford, TX.
- Too much drain opener can damage the plumbing and the P-tarp.
- If the drain opener fails to unclog the drains, it will accumulate within the pipe and you’ll be left with no other option but to unscrew the P-tarp and clean the pipe yourself.
- A drain opening chemical damages the rubber gasket, which causes leakages in the future.
Having No Spare Parts
Just like any other technical job, plumbing repair in Bedford, TX, too can’t be done without spare parts. For example, while fixing a faucet, people only buy a cartridge or a washer. What they fail to understand is that because of a damaged washer or cartridge, the faucet can too be damaged. If you don’t replace the o-rings and gaskets during a repair, you might be left with a leaky faucet. These spare parts are not that expensive. So, the next time you visit a hardware store, make sure to buy them all upfront. Instead of replacing some old parts with new ones, it is better to build a new faucet altogether.
Not Turning the Water Off
Another common DIY mistake that happens during a plumbing repair in Bedford, TX is that people try to swap in a new valve, while the water is on. That rarely turns out well, and if you fail to attach the faucet in a timely manner, chances are that they entire space will be flooded. Flooding will cost you thousands of dollars, so it is best to spare a moment and turn off the water supply.
Exerting Too Much Force
When sink and toilet valves are shut for a long period of time, they tend to seize and opening them becomes difficult. The mistake that most people make is that they think that by exerting too much force, they’ll be able to open them. This is rarely successful and you end up breaking the valve instead of opening it smoothly. The problem is that the stem is welded to the valve system. Therefore, it is difficult to open. To turn the knob without breaking it, the steam needs to be undone lightly with a wrench.
Lack of Tools
A plumbing repair in Bedford, TX can result in a failure if you lack the necessary tools. The reason why a plumber’s job seems easy is because they are always equipped with the right set of tools. DIYers fail to go the extra mile, and try to execute a plumbing project with whatever tools they have on hand. Trying to remove and old worn nipple with an ordinary wrench or pliers only tends to break the break the pipe, leaving marks on the walls. The easiest way of preventing such accidents from happening is by investing in a good quality wrench set, which is available at any hardware store.
A plumbing repair in Bedford, TX is a complex process. It is beyond the knowledge of a homeowner to understand the technicalities of plumbing and the possible issues which might occur. Only with the help of a professional plumber can you solve the plumbing problems in your house. Professional plumbers posses the right amount of experience, skills and tools to figure out a problem and fix it in an effective manner.
If you are looking for a professional plumber, stop looking for we have got you covered. With a team of seasoned professionals we provide the best plumbing services in Texas. If you need help or information, feel free to visit our website.