The Most Common Electrical Problems at Home and When to Call an Electrical Service | Hurst, TX
Photo By tab62 at Shutterstock
When all your appliances in the house run on electricity, electrical problems become inevitable. While electricity is an important part of our everyday life, it can also be a cause of many accidents and destructive house fires. In fact, it is one of the most common causes of house fires. With some precautionary measures and a thorough check in the house, you can safely avoid dangerous mishaps.
Here are the most common electrical problems at home that also indicate that you need to hire an electrical service in the Hurst, TX area for repair:
Power fluctuation and sudden electrical surges can be a sign of a lingering electrical problem in your house. They usually occur for a microsecond and are caused by faulty electrical appliances, damaged wiring, and problems in your power line. If you experience frequent power surges around your house, then you must call an electrical service for inspection. Power surges can cause a lot of damage— for example, they can damage your electrical appliances. It is, therefore, necessary to find an electrician in the Hurst, TX area,to find the cause of the problem and fix it as soon as possible.
Frequent Burn Out of Lights
If you find that your light bulbs burn out frequently and they do not last as long as they should, then that shows you need to opt for an electrical service. There can be many causes of this frequent burn out of lights. It could be faulty wiring in the circuits or in the mains as well as high wattage. A lot of wattage on one switch can also be a cause or that the insulation is very close to the light source. A loose connection in the socket and the heat up of the fixtures due to nearby insulation are the most common reasons of the frequent burnouts of the lights in the house. If you feel that it is a serious electrical problem that cannot be fixed by yourself, find an electrician to solve your problems.
Problem in Light Fixtures
Light fixtures not working properly is another common electrical problem at home. There can be various reasons of the problem in your light fixtures. It is best to check on your end if there are any problems with the light bulb. Sometimes, the light bulb is not attached to the fixture properly, which prevents the fixture from working. If you find that the light bulb is screwed in the right way, check the breaker in the breaker box. If the breaker has not tripped either, it is clear that there is some other electrical problem that requires you to hire an electrician. Do not meddle with any other electrical components to fix this problem; rather, opt for an electrical service.
Apart from power surges, you might also face another type of power fluctuation, called voltage sags or dips. Voltage sags are abrupt reductions in voltage because of an overload or starting an electrical motor. They are also known as brown outs because in voltage sags, the lights become dimmer for a second and then get brighter again without switching off completely. Voltage sags can occur because of many reasons. You might be switching on a lot of big appliances at the same time. It is also possible that your electric panel is outdated and thus, switching on many appliances has overloaded it by drawing too much electricity. Faulty and damaged wiring can also be a cause of voltage sags. You will need to opt for an electrical service to sort out this problem before it causes a serious short circuit.
Electrical outlets allow you to plug in your electrical appliance to connect it to the power grid. Some outlets do not work even when the power is on in the rest of the house. If you find that other outlets are working fine except one in particular, it means this outlet is dead. Dead outlets are not only bothering, but they also increase the risk of a fire breakout in the house. A tripped poor connection can result in a dead outlet or sometimes, excessive heat causes the wires in the outlet to melt, which trips the breaker. Regardless of the cause, a dead outlet can be hazardous. It is important to seek an electrical service to get the dead outlet fixed.
Tripping of Circuit Breaker
The electrical panel ensures safe electrical flow everywhere in the house. If one particular area of the house is using more electricity than the circuit can manage, the breaker of that particular area in the electrical panel trips automatically. The tripping cuts the power supply to that area and thus, saves your house from accidents and a fire outbreak. If you manually turn up the breaker and it still keeps tripping, even though there is no load on the circuit, you will have to call an electrician.
Electrocution in the House
Electrical shocks are a very common problem in the house. Most of us have experienced it in our house, but it is important to find out the cause of an electric shock. Bad insulation or wiring, which is not properly grounded, can be the major cause of electric shocks that people experience in their house when they come in contact with an electrical appliance or a switch board. Advanced architectural designs have substantially eliminated the risks of electrocutions, but if you live in an old house, you might still face this problem. If you get an electric shock when you plug in an appliance, check the outlet by plugging in another appliance. If you get an electric shock again after turning it on, it indicates that there’s a problem in the wiring and you will need an electrical service to solve the issue.
If you are looking for an electrician in the Hurst, TX area, or a reliable and professional electrical service, visit https://tiogacontractors.com/.