Water Heater Repair: When To Call A Technician | Bedford, TX

A water heater is an essential appliance in most homes in Bedford, TX, but some homeowners take it for granted. A water heater enhances your comfort and helps you enjoy carrying out daily activities such as washing, bathing, and cleaning utensils. Don’t wait until cold water hits you while in the shower or pools of water collect in the basement before you start looking for a water heater repair specialist.

Just like any other fixture, a water heater wears down with time. A properly maintained water heater can serve a homeowner for about 10 to 13 years. You may not have to wait for the unit to fail to call a professional plumber. You should watch out for some signs to avoid the inconveniences resulting from a malfunctioning water heater. Below are some signs that you need help from a technician.

Puddles of Water Around the Unit

If you notice pools of water around the water heater base, it could be a sign that your unit is having some issues. It becomes an issue of concern when water leaks from the unit to the point of accumulating. A water heater may start leaking for various reasons, including age, improper installation, or increased tank water pressure. Such leaks can cause severe problems to your home, especially if you have kids, pets, and electrical appliances near the area.

If not resolved in time, it can result in mold growth, which damages your home and affects the health of your loved ones. That’s why it’s essential to attend to small leaks before they translate into bigger ones. Water leaking from the top of the unit could be due to loose or cracked pipes while the water coming from the bottom could result from build-up pressure or condensation issues. Whatever the cause, the problem needs to be addressed immediately.

A water heater technician can help you tighten loose connections and replace cracked pipes. Such a professional can inspect the unit to find the possible cause of leaks to provide a permanent solution.

Water Temperature Issues

This is an obvious sign you need a water heater repair. You may be getting cold water, lukewarm, or too hot because of some reason. If the water coming out of the faucets is cold, it could mean that your water heater has a defective thermostat or water heating elements.

Also, if there’s no power in your Bedford, TX home, you may not get hot water. If this happens, the best thing to do is to contact a water heater repair specialist to check the power source and the thermostat to ensure it’s receiving electrical energy.

At times the water coming from the faucets may not be hot enough. The cause of this could be a faulty thermostat or heating element. Another possible cause could be an undersized water heater as it may not handle the hot water requirements.

During cold months, hot water may cool slightly as it passes through cold pipes resulting in lukewarm water. You may be required to slightly raise the thermostat settings during such months to get the usual hot water. But, contacting a professional water heater technician to assess the situation is always a good idea.

If water running is extremely hot, it could also mean that the thermostat is set too high. Some homeowners may try to resolve this by adjusting the thermostat setting, but it may not offer a permanent solution. If you cannot find the cause, you should contact a water heater specialist immediately.

Strange Noises From the Unit

It’s normal for a water heater to produce some noises when heating the water, but at times it becomes too loud. If you experience such sounds, it’s a clear sign that the unit has some issues, and a water heater repair technician may have to inspect it. If you hear banging or knocking noises from the water heater, it could be due to the accumulation of sediments at the bottom of the unit or the build-up of scales around the water heating elements.

As you heat water daily, sediments thicken thereby, lessening the effectiveness of the water heater unit. As a result, you may get water that’s not as hot as it should be. A solution to this is draining the tank to remove sediments and descaling the heating elements. You should have a water heater repair specialist perform the job to ensure the process is a success and the water heater works as before.

Rusty and Discolored Water

Unless the taps have been left for a long time, the water coming out should be clear. If dark brown water comes out from both cold and hot water faucets, chances are you have corroded pipes. However, if it happens when you turn on hot water pipes, it’s a sign of a corroded water heater.

The discolored water could result from scale build-up on the heating elements or sediments at the base of the tank. If left unaddressed, too much scaling can result in leaking or even tank ruptures. That’s why it’s crucial to call a water heater repair technician immediately when you notice rusty water coming from the hot water faucets to flush the tank and conduct necessary repairs to restore the normally clear water.

Water Takes too Long to Reheat

This is one of the drawbacks of electric-powered water heaters. Unlike gas models, an electric model takes a long time to reheat the water. If your unit is taking longer than before, you should call a water heater repair specialist to assess the situation.

The problem could result from a faulty thermostat or failing heating elements due to the accumulation of sediments. A professional plumber can help you repair or replace the failing water heater parts.

Get Water Heater Repair Services Today!

Having a failed water heater in your home can be inconvenient. If your water heater is having issues, you can reach out to Tioga Plumbing & Electric in Bedford, TX. With state-of-the-art hardware and operators, our company offers emergency services 24 hours a day.

Our licensed technicians have the necessary skills to handle repairs, installation, and servicing of water heaters. Need a water heater repair? Don’t hesitate to call us.

Photo By Vitaliy Halenov at istock