Month: September 2020

Photo By Roka at Shutterstock

It’s common for water to drip from a shower head when it isn’t in use, which is an annoying problem. A leaking or dripping shower can cause homeowners issues like damp and moisture in the bathroom, encouraging mold and mildew to grow. A definite need to call a plumber

If water drips from your show head while you’re running a bath, this may indicate that one or more of the showers’ replaceable parts have worn out or become damaged. There is a diverter in the faucet that diverts the water to either the bath or shower. If this component isn’t working effectively, your show will drip when you run a bath. This problem can be easily rectified by a professional who can replace the parts and repair so shower to no longer drip.

You may find that large quantities of water will flow from your shower head while you’re running a bath in more severe situations. This indicates that there’s a more serious problem, and you’ll need to call a plumber who can offer professional advice.

This article will look at the causes of a dripping shower head. We’ll tell you why your show drips while you run a bath and help you solve the problem. It would be best if you never did DIY plumbing unless you know what you’re doing; instead, call a local plumber. If you’re searching for a professional in Irving, TX, or the surrounding area, don’t hesitate to contact Tioga Contractors.

Why does water drip from my shower head when I fill the bath?

There are several reasons that your shower may be dripping while you run a bath. This is a surprisingly common problem and can be very annoying, especially if you’re enjoying a warm bath, and the shower continues to drip cold water onto you. Before calling a plumber, you can turn the water off at the main valve. This will stop water flowing into your home, which may cause damage or flooding.

Water Volume

If your shower head is dripping when you’re filling your bath, you should call a professional to check whether the replaceable parts have worn out. A professional will also be able to check how much water is flowing through the shower’s system and can change the volume if necessary.

If the water volume is too high, this will create an increase in pressure, which will cause to shower head to drip. If this is the problem, a plumber may need to use a wider pipe, which will help reduce the pressure build-up.

Replaceable parts wearing out

A professional plumbing company will also check the replaceable parts, such as washers and the water flow regulator. These suffer from wear and tear over time and are commonly damaged. Simply replacing these parts will ensure that your shower no longer drips.

The diverter is a part that diverts water from the bath to the shower, and if it’s worn out or weakening, it won’t be able to do its job correctly and will need to be replaced. In some cases, the diverter would have become loose and simply needs to be tightened. A plumber will also look for loose fittings inside the shower system and will tighten these up or replace them as necessary.

Dirt in the Shower Head

Over time dirt and debris will build up in your shower head, which will result in it not working as effectively as it should. Shower heads need to be cleaned regularly. To do this, you may need to unscrew the shower head and look inside. Some shower heads have rubber coating around the holes; these stick up slightly and can be simply pushed in while the shower is running to clean them.

Does the Shower Head Need Changing?

If you’ve cleaned your shower head and it’s still leaking or dripping, you should call a plumber to assess the situation. A professional will be able to either fix the shower head by cleaning it or replacing some of the parts that have worn out. Depending on your shower head condition, a professional may advise that you replace the entire shower head.

Can a shower head become faulty?

Over time shower heads will start to deteriorate and can become faulty. Like everything else, shower heads have an expiry date. Some showers are well designed and manufactured using good quality components, which makes them durable and long-lasting. Others don’t last so long and will need to be replaced.

Shower heads do undergo wear and tear during their life. A good shower head will last a long time, but it may have parts that don’t last as long and need to be replaced. Therefore, it’s essential to get a plumber to look at your shower and undertake any necessary maintenance regularly.

Some manufactures also provide a warranty with their shower heads. When you buy a new shower head, it’s vital to keep any guarantees you’ve received in a safe place. This will also help you get a free replacement showerhead if the open you’ve purchased doesn’t last long enough.

Tioga Contractors

Sometimes, water drips from a shower head when you’re filling the bath. This is a common issue that is caused by several underlying problems. Ask a professional to check out the showerhead and rectify the fault. It’s a good idea to keep your shower head in good condition by regularly cleaning and maintaining it.

If you’re having problems with your shower head and are searching for a plumber in Irving, TX, or the surrounding area, don’t hesitate to contact Tioga Contractors. The company pride themselves on keeping up with technological advances and can carry out all types of plumbing jobs, including repairing water leaks, shower pan and shower head repair or replacement, installing tankless water heaters, fixtures, and appliances. They are a home advisor, top-rated company, and a BBB accredited business.

Tioga Contractors can be contacted at 469-789-1292.

Photo By

One of the most essential appliances in your Bedford, TX, home is your water heater. Without hot water, you can’t shower, wash your hands, wash your dishes, do your laundry, and perform basic household chores. Because you rely so much on your water heater, it is important that you are able to recognize the signs that you need to call a professional in water heater repair. The sooner you realize that there is a problem that needs to be repaired, the less chance there is of experiencing a complete water heater breakdown.

#1 No Hot Water

If you turn on the hot water and it comes out cold, or if it doesn’t come out as hot as usual, you should first check the thermostat. Your water heater should be set to 120 to 140 degrees Fahrenheit. If your water heater is set lower than it should be, it could be what is causing the problem. You should also consider the temperature outdoors. If it is a very cold day, the pipes will be cold, and it will take longer for the water to heat up.

If everything checks out and you still have no hot water, you should call a professional in water heater repair. If you have an electric water heater, the heating element may have failed. If you have a gas water heater, there could be an issue with the pilot light. It would take help from a professional to determine the cause of the problem and then make the necessary repairs.

#2 You Are Running Out Of Hot Water Sooner Than Usual

If you are running out of hot water sooner than usual, you should first consider your hot water demand. If your family has recently grown or you have been using more hot water than you usually do, the problem is the size of your water heater. If this is the case, you may need to install a water heater with a larger tank. You can also install a tankless water heater, which provides hot water on demand.

If your hot water demands haven’t changed, you should call a professional in water heaters. Electric water heaters have two heating elements. If one of the elements is not working, only half of the tank will stay hot. This could be why you are running out of hot water faster than you should be.

#3 Rusty Hot Water

When you turn on the water in your Bedford, TX home, it should come out clean and clear. If the water is coming out rusty, it is cause for concern. If both the hot and cold water is rusty, it could mean that your pipes are rusty and corroding. If only the hot water is coming out rusty, the problem likely lies within your water heater, and you will need to call a professional in water heater repair. Over time, sediment and other debris can build up inside the water tank. This can cause the water to come out rusty. Since it is dangerous to bathe in or drink rusty water, you should call a professional immediately.

#4 Strange Sounds

When your water heater is functioning correctly, it should be quiet. The most you should hear is a low-level hum. If you hear strange sounds coming from your water heater like a rumbling or gurgling sound, you should call a professional in water heater repair. As mentioned above, sediment can build up inside the water heater. As the tank heats up and cools down, the sediment can become loose and can clang around inside the water tank. When you call a professional in repairs, they will inspect the water heater to determine if the issue can be fixed, or if you will need to replace your water heater.

#5 Water Around the Unit

There should never be any water around your water heater. If you notice moisture around the unit, you should call a professional in water heater repair. The problem could be something simple, like a loose or broken hose. It could also be something serious like a crack in the tank.

Most homeowners keep their water heaters tucked in the corner of the basement or a closet. Since the water heater is out of sight, it is a good idea to check it monthly. If the water heater is leaking, regular checks will allow you to catch it early.

#6 Strange Tasting Water

If your hot water has a metallic taste, you should call a professional in water heater repair immediately. The inside of the water tap could be corroded, which is causing the water to taste weird. If this is happening, you should avoid drinking the water until a professional can get to your home and examine your water tank.

#7 Poor Water Pressure

If you have poor cold and hot water pressure, you have a problem with your plumbing system. If just the hot water has low pressure, the problem likely lies within the water tank. As sediment builds up inside the tank, it can cause a blockage in the pipes. This is something that only a professional in water heater repair should fix.

If you are experiencing any issues with your water heater, you should not make the repair a DIY project. Water heater repairs are complicated, and if you make one mistake, you could make the problem even worse. If your water heater is under warranty, trying to make the repair yourself will void the warranty. If you need water heater repair, you should contact Tioga Plumbing. We are a family-owned and operated business and have been serving residential and commercial customers in the area since 1953. Each of our plumbers is licensed, insured, and highly trained. If you are having any issues with your water heater, Tioga Plumbing can inspect the unit to figure out what is causing the problem and make the necessary repairs. We understand that water heater and plumbing issues can arise at any time of the day or night, which is why we offer 24/7 emergency service. To schedule an appointment, give us a call today.

Photo By Moyo Studio at istock

If the plumbing system in your Irving, TX home is functioning correctly, you don’t think much about it. As long as the water is coming from the faucets properly, the water is draining quickly, and your toilet is flushing, your plumbing is the furthest thing from your mind. It isn’t until you start having plumbing issues that you begin to worry. Plumbing issues can arise at any time, which is why you should consider having your drains cleaned regularly. Not only can this prevent an issue from occurring, but regular drain cleaning can also solve a problem. There are several reasons why you should make annual drain cleaning service a priority.

What Is Involved In a Drain Cleaning Service?

The method that the plumber will use to clean your drains would depend on the severity of the problem. In some cases, a drain snake will remove whatever is clogging the drain. The plumber can also use hydro-jetting to clean the pipes. During this type of cleaning, high powered water is run into the pipes to wash anything and everything that has attached to the inside of the pipes. If the plumber needs to find the location of the clog or wants to check the condition of the pipes, they can perform a video inspection of the drain lines.

#1 Eliminate Clogs and Slow Drains

If the drains in your home are slow or clogged, it can make everyday tasks very inconvenient. Regardless of how careful you are with what you put down the drain, soap scum, hair, waste, and mineral deposits can build up inside the pipes. This will restrict the water flow, and eventually, the water won’t go down at all. The best way to prevent slow or clogged drains is to call for drain cleaning every year. When you have your drains cleaned regularly, it will prevent clogs from building up inside the pipes. This is much safer and effective than constant plunging or liquid drain cleaners.

#2 Prevent Foul Odors Inside the Drain

If you are standing over your sink and notice a foul odor coming up from the drain, there is likely food and other debris built up inside the pipes. As the food and debris spoil, it can release a foul smell that will waft up into the room. The best way to get rid of the odor and prevent it from occurring again in the future is to hire a drain cleaning service every year. Anything that has been built up in the pipes will be removed during the annual drain cleaning, which will avoid odor issues in the future.

#3 Quiet Noisy Drains

If you notice a gurgling sound when your water goes down the drain, you should call for a drain cleaning. If there is a clog in the pipes, the water is going to need to change course to get past the clog. This will cause a gurgling sound. Should you choose to ignore the problem, eventually, you are going to end up with a completely clogged drain. If you call for a drain cleaning service, the clog and anything else blocking the water will be removed, making your drains quiet again.

#4 Reduce the Risk of Mold and Bacteria Growth

If there is an accumulation of debris inside your pipes, standing water can accumulate. When this happens, it creates the perfect place for mold and bacteria to grow. Over time, this can cause a foul odor and serious issues with your pipes. The best way to prevent the growth of mold and bacteria in your pipes is to have an annual drain cleaning service performed. Preventing mold and bacteria is better than having to deal with the problem when it has occurred.

#5 Fruit Flies

When food and other debris build up inside the pipes, it can cause fruit flies to materialize inside the drain. This makes for an unsanitary issue and can be embarrassing when company comes over. If you want to keep fruit flies from materializing in your drains, you should call for an annual drain cleaning service. If the pipes are clean and free of debris, you won’t need to worry about fruit flies in your kitchen or bathroom.

#6 Safer Than DIY Methods

Many Irving, TX homeowners will try to clear their drains themselves in order to save money. Unfortunately, the DIY method can end up causing more harm than good. Liquid drain cleaners aren’t always effective, and the chemicals can cause the pipes to corrode. An annual drain cleaning service is much safer than trying to clear the pipes yourself.

#7 Increase the Lifespan of Your Pipes

When food and debris build up in the pipes and is allowed to remain there, it can cause erosion on the inside of the pipes. Over time, the erosion can get so bad that the pipes will need to be replaced. When you have an annual drain cleaning service performed, built up, food and debris won’t have a chance to erode the pipes, which will increase the lifespan.

#8 A Thorough Inspection of the Pipes

During a regular drain cleaning, the plumber will be able to do a thorough inspection of the pipes. If there is a small leak, it can be detected quickly, which will prevent water waste and water damage. When your pipes are inspected every year, it will reduce the risk of a plumbing emergency in the future.

The best way to keep the pipes in your home safe is to have Tioga Plumbing, Electric & Glass perform an annual drain cleaning service. We are a full-service residential and commercial plumbing and electrical company and have been serving customers in the area since 1953. Each of our plumbers is licensed, insured, and highly qualified and experienced. To get the inside of your pipes clean, we can use a number of different plumbing techniques, based on the condition of your pipes. To schedule an appointment to have your drains cleaned or for any other plumbing service, give us a call today.

Photo By gwmullis at istock

Your home will give you plenty of warning signs when it is time to hire an electrician, in Irving, TX. Here are several clues that will inform you when you have a major electrical problem on your hands. Don’t let these problems below fester and go unattended, as many of these warning signs can lead to fire or further electrical issues. Your home is your most important investment and your electrical system is a vital part of your home, do not skip out on maintenance of your electrical system.

Hot Outlets

While many appliances will generate heat when operating, your outlet should never be hot or warm to the touch. If you should notice an outlet is now suddenly warm or hot to the touch you should unplug any cords connected to it immediately. You should refrain from using that outlet until an electrician has troubleshooting the issue. Switch cover plates are the same story, with the lone exception of dimmer switches which are commonly warm to the touch. Dimmer switches are only warm to the touch as they expel the excess electrical energy. It should be noted however that even dimmer switch plates should never be hot, only warm. If your dimmer switch feels hot to the touch, it can not handle the wattage and will need to be replaced by an electrician.

Flickering Lights

Flickering lights are not the sign of ghosts or spirits, but of an electrical issue. Usually, flickering lights are caused by a loose electrical connection. If only one light is flickering the fix is pretty easy and straightforward. However, if multiple rooms or lights are affected, then your problem lies farther back in the circuit in most cases. If your whole house is flickering the issue could be in the breaker box or the utility drop outside. If your flickering lights are caused by loose wiring then you want to hire an electrician right away as loose wiring is one of the top causes of home fires. You should never ignore the warning signs given by flickering lights, instead call in a pro to determine what is causing the issue, as it may be more than the minor annoyance you thought it was.

Aluminum Wiring

Only homes built in the late 60s and early 70s tend to have this type of wiring. Copper prices were higher back then and many home builders took the cheap option of running single strand aluminum wire. Lab tests at the time suggested it was safe, so it seemed like a good idea to keep down the costs of a new build. The problem however didn’t show up until these homes aged, as the aluminum wiring oxidizes faster than copper does. This leads to the build-up of heat and leading to fire risks. If your home has this type of wiring today, it is a fire risk. A home with this type of wiring is 55 times more likely to experience a house fire. You can have this issue addressed with specialized connectors or a complete home rewire. It is always best to consult with an electrician, in Irving, TX if you have aluminum wiring.

Burning Smell

This is likely the top warning sign that you need an electrician! If your home’s wiring is heating up enough to melt the plastic sheathing on your wires you are facing the immediate risk of a fire and you need to take action right away. You need to determine the source of the issue whether it is the breaker box or at one fixture. If you cannot figure out what is causing the burning smell then turn off your breaker and call an electrician right away. Many house fires started out with the tell-tale burning wire smell.

Improperly Grounded Flexible Gas Lines

If your home has corrugated stainless steel tubing (CSST) or flex line to supply gas in your home, you want to ensure that it is properly grounded. An electrical surge such as caused by a lightning strike could rupture the corrugated stainless steel tubing, resulting in a gas leak or worse yet an explosion. If you are unsure whether your gas line is grounded or not you should call a licensed electrician.

Ungrounded outlets

If you happen to touch anything metal connected to your home’s electrical lines and receive a shock, this is a strong sign that you have grounding issues. This means your outlets or wiring is not properly grounded. Not only does this go for fixtures such as lamps and appliances but also water lines and furnace ductwork. I should point out not to confuse normal static shocks with nasty electrical shocks caused by poorly or ungrounded wiring and outlets. Most appliances these days have 3 prongs and if your electrical service is ungrounded your appliances won’t be protected.

Loose Outlets

Loose outlets lead to loose wiring inside of the outlet. You want to get this solved quickly as loose wires in your outlets can lead to shorts, sparks, and even fire hazards. Never tinker with an outlet if you do not understand fully the wiring involved, as you could become electrocuted easily by touching the wrong wire. Luckily this issue is fairly easy and inexpensive to fix.

Rodent Activity

If you have rodents in the walls of your home, chances are they have chewed the wiring. Rodents often will chew a wires protective sheaf bare, exposing live wires. This of course is a severe fire hazard. Your wires once bare can easily spark or overheat, therein lays the fire hazard. If you suspect you have rodents in your walls it is time to not only call an exterminator but also an electrician.

If you have any of the above electrical issues, call the pros at Tioga Contractors today for an estimate! We even have emergency hours in case you have an emergency that cannot wait till normal business hours. We offer prompt, emergency service 24 hours a day, 365 days a year. We are a BBB accredited business.

Photo By Pineapple studio at Shutterstock

In a perfect world, everything in your Hurst, TX home, would function properly. Your heating and air conditioning system would function correctly, your electrical system would work without any issues, and the water would come out of the faucets properly and go down the drain with ease. Unfortunately, we don’t live in a perfect world, and things can go wrong in the house. Many people try to make their home repairs DIY projects, which isn’t always the best decision. Many home repairs are complicated, and you could end up causing more harm than good.

If your toilet is clogged, you can use a plunger to get the water and waste to go down. However, there are other issues that should only be handled by a licensed professional.

#1 Clogged or Slow Drains

If the water is going down the drain slowly, or if the water won’t go down at all, you should have a licensed plumber come to your home. Many homeowners will try to remove the clog themselves using a liquid drain cleaner. Unfortunately, these products don’t always work, and the chemicals in the drain cleaner can cause serious damage to the inside of the pipes.

When you hire a licensed professional, they will bring the necessary equipment to remove any size clog quickly and effectively.

#2 Rusty Hot Water

Anytime the water in your Hurst, TX home, comes out rusty, it is considered an emergency situation. Rusty water isn’t safe for drinking, showering, or any household chores. If both the hot and cold water are coming out rusty, it is likely due to rusty, corroded pipes. To resolve the issue, a licensed professional would need to find the pipes that are corroded and replace them.

If it is just the hot water that is coming out rusty, the problem likely lies within the water heater. Over time, rust and sediment can build up in the water heater, which will cause the hot water to come out rusty. In cases like this, a licensed professional will inspect the water heater to determine if it can be repaired or if it needs to be replaced.

#3 No Hot Water

If you turn on the hot water and it comes out cold, or if it doesn’t get as hot as it should, it is time to call a licensed plumber. The cause of the problem is likely a faulty water heater and should only be repaired by a professional. If you try to make the repairs on your own and make just one mistake, you could cause a complete water heater breakdown. Also, if the water heater is under warranty, DIY repairs will void the warranty. You should hire a professional to inspect the water heater and make the necessary repairs.

#4 Noisy Drains

When the water goes down the drain, it should do so quietly. If you hear a gurgling sound when the water goes down, you should call a plumber. When there is a clog in the pipe, the water will need to change its course to get around the clog, which causes the gurgling sound. If you allow the problem to persist, you could end up with a completely clogged drain. A licensed plumber can come to your home, remove the entire clog, and your drains will be quiet again.

#5 Dripping Faucet

If you have a dripping faucet, it is easy to ignore. After a few hours, you will get used to the dripping sound and won’t even hear it. Just because the dripping is easy to ignore, it doesn’t mean that you should. Over the course of a year, a dripping faucet can waste 3,000 gallons of water. Not only is this bad for the environment, but it is also going to cause your water bill to increase.

As soon as you notice that the faucet is dripping, you should call a licensed professional. Once the problem is fixed, you won’t need to worry about wasting water.

#6 Running Toilet

If your toilet is functioning correctly, it will fill with water when your flush. When the tank is full, the toilet will stop running. If your toilet is constantly running, you should call a licensed plumber. The problem could be with the stopper in the toilet or with the tank’s seal. Because a running toilet wastes over a gallon of water an hour, you should call a licensed professional immediately.

#7 Water Around the Water Heater

If you are like most homeowners, you keep your water heater tucked into the corner of the basement or in a closet. Since the water heater is out of the way, it is a good idea to inspect it every month. If you notice any water around the water heater, you should call a licensed plumber immediately. The problem could be something simple, like a loose or broken hose. It could also be something more serious like a leak in the water heater tank. It is essential that you call a licensed plumber as soon as you notice water around the water heater.

#8 Low Water Pressure

If you turn on your water and suddenly the water pressure is much lower than it once was, you should call a plumber. There could be a small hole in the waterline, causing the water pressure to be decreased. This is an issue that should be taken care of as quickly as possible.

If you are experiencing any issues with your plumbing system, contact Tioga Contractors. Each of our plumbers is licensed, insured, and highly skilled and trained. Whatever your plumbing issue, we can handle it. At Tioga Contractors, we understand that plumbing emergencies can arise at any time of the day or night. This is why we offer 24/7 emergency service. We are a family-owned and operated business, who has been servicing residential and commercial customers in the area since 1953. We have all of the equipment necessary to make sure that your plumbing system is healthy and functioning properly. To schedule an appointment, give us a call today.