Month: April 2021

Most people wake up and wander into the kitchen for a hot cup of coffee and then grab a quick bite or head upstairs to the kitchen. After wasting a bit of time puttering around while the water warms up you take one last sip of coffee and then jump in. Most of the time this process probably works out well, but if you step into the shower and it is ice cold your day will suddenly take a very quick turn. Outside of maybe one or two people on the globe, no one wants to step into an ice-cold shower so it may time to call a Bedford, TX plumber.

While you wait for the plumber to show up at your home, you can explore a few issues that might possibly help explain your cold shower or at least narrow down what is going on. In most circumstances, something will be wrong with your plumbing that you need a plumber to address, but every so once in a while the solution is actually innocuous so it won’t hurt to investigate a bit while you wait. After all, you can’t do anything without hot water so you have nothing to lose.

Take a Good Look at Your Hot Water Usage

The very first thing you should do before you panic and call the plumber is think about your home’s hot water usage. Are you the first one to get in the shower? That makes the situation a lot different than if the kids or your spouse has already been in the shower. If you have a standard hot water heater there is only so long that you can expect your water to last until your water heater cycles. In this case, you don’t have an emergency, but you do need to consider if there is a better way to conserve water or if you need to upgrade the size of your water heater.

Take a Peak at Your Water Heater

On the other hand, if you are the first one in your home to jump into the shower you may have larger issues to deal with. The first thing that most people think of when they find a cold shower is the water heater, and rightfully so. There are a lot of scenarios that may cause your water heater to stop malfunction. In this case, you will need to call a plumber but can check a few things out around your water heater while you wait.

Take a minute to run to the lower floor or basement of your Bedford, TX house and see if the pilot light is on or not inside of your water heater. If the pilot light is not on you have your answer as to why the water was freezing. You can attempt to relight the pilot light on your own if you know how, and that hopefully will solve the problem. However, if you try to relight the pilot light and it either won’t stay on or it won’t light at all this is a sign that you need to have a plumber look closer at your water heater. The ignitor can break or corrode which could be where the problem lays.

If the pilot light is on but you still don’t have any hot water the next thing you should do is check the thermostat on your water heater to make sure that it didn’t get hit or knocked out of place. Most homes have their water heater temperature set around 120 degrees Fahrenheit. If yours is in the right place then at this point you have no choice but to wait for the plumber to help guide you to the next step.

While down there peak around the water heater to look for leaks. Any damp spots on the floor nearby can indicate a leak which turns a lack of hot water into a bigger emergency that you need to take care of right away before the leak becomes a burst tank. If your unit is making any type of odd noise like screeching, banging, or knocking then you should turn it off while you wait for the plumber to arrive.

Test Other Faucets in Your Home

One other way to isolate whether the problem is your water heater or not is to try out other faucets around your home. If you don’t have hot water on any floor of your home or in any room then the problem is probably related to your water heater. On the other hand, if you have hot water on a different level of your home then you have a separate issue that needs to be addressed.

Thinking About Replacing or Repairing Your Shower Valve

If you do notice that other faucets are just fine outside of your shower, then it may be time to look at your shower valve. The shower valve is responsible for mixing hot and cold water before it pours out of the showerhead. If something is wrong with the valve it may not be allowing any hot water to pass into the showerhead. All it takes is for one small part like the washer or O-ring to corrode or wear out to ruin the steady flow of water.

If none of these issues appear to be the problem, or if you discover one of them is the problem but you have no idea how to fix it then it is time to call a plumber. Tioga Contractors has been helping Bedford, TX residents with their plumbing issues for years and will be happy to come to take a look at what could be causing your hot water issues.

Photo By fizkes at istock

There are many options available when you’re looking for a new family home. You may like to buy an existing property or continue renting. An increasing number of people are choosing to build their homes from scratch. If you’re looking to create your dream home, you’ll need a team of architects and tradespeople, from builders to plumbers and an electrical service.

If you live in Hurst, TX, and are searching for an electrician to wire your new build or repair any existing issues in your old home, you may like to contact Tioga Contractors. The company provides a good quality electrical service and is also available for emergency call out.

Many people take inspiration from property programs on the TV. While building your own home can be challenging and takes passion and dedication, the end result will be worth it.

There are many benefits to self-building; let’s look at some of the main reasons people design and build their own homes. We’ll also tell you what to consider before taking on a self-build project.

May Save You Money

Research shows that building your own home often costs less than buying an existing property. In fact, you may be able to save a staggering 30% more than if you were to purchase pre-built real estate.

It’s also possible to make further savings as your stamp duty will be charged on the cost of your land instead of on your finished property. You’ll also be able to reclaim any VAT you’ve paid on things like material and installation costs.

Create a Modern and Energy-Efficient Home

One of the main reasons people decide to build their own home is that it will be more modern and they can choose new systems and devices. Smart features, new appliances, and good electrical and plumbing systems can all be integrated into your self-build home to make it very modern from the beginning. Choosing energy efficient windows or even solar panels will make your home more energy efficient, and you’ll benefit from lower monthly utility bills.

You’ll also be able to install modern luxuries, including underfloor heating, which is costly and challenging to install in a pre-made property.

Good Resale Value

If you’re good at budgeting, it’s likely that your finished home will be worth approximately 20% more than it cost you to buy the land and build. Buyers will often pay more for modern self-build homes, so you may be able to enjoy an increased profit on your investment.

No Competition

It’s often tricky to find the perfect home, especially if you’re viewing properties in a desirable area. Often new homes are bought as soon as they appear on the market. It could be frustrating if you thought you had found the perfect home only to discover that it had been snapped up by someone else.

If you decide to build your own home, you won’t have much competition, and you’ll know that you can move into the house once it’s built.

Your Home will Perfectly Suit Your Needs

Building your own home allows you to consider exactly what you need; you’ll be able to ensure the finished home meets your exact specifications. You can choose the perfect fixtures and fittings, appliances, and décor.

You Can Choose Your Location

The first thing to consider when designing your new home is its location. Rather than only looking at one location, you may like to check out a few. You can have a look around some showrooms in the area and speak to local contractors such as builders, plumbers, and an electrical service.

If you have no idea which suburb you want to live in, it’s a good idea to take the time to look into a few different areas. Walk or drive around the suburbs and – visit showrooms and eat at cafes. It’s also worth checking how long it would take you to get to work before deciding where to build.

Things to Consider When Opting for a Self-Build

A self-build will take time and dedication as well as many professionals such as builders and an electrical service. Here are some things you should consider before realizing your dream of building your own home.

Choose a Development Company

There are development companies available that provide set house footprints at a fixed cost. This is the best option if you’re looking to make building your home as straightforward as possible.

If you have your own style and want special components, then you’ll require more flexibility and may like to manage the project yourself. This would require you to employ a builder, plumber, and electrical service separately to ensure you get every component just as you want it to be.

To find the right tradespeople, you can visit show homes, ask friends and family for recommendations or ask your followers via social media.

Mortgage and a Lawyer

Once you’ve decided on where you want to build your new home and have found the correct contractors, you’ll also need to get a mortgage pre-approval and a lawyer. You may like to employ a mortgage broker to find the best deal for you. Mortgage brokers are professionals who know the market inside out and will be able to shop around to find the lowest interest rate. They will also advise you on how much you can borrow.

Tioga Contractors, electrical service, Hurst, TX

If you live in Hurst, TX, and are searching for an electrical service to wire your new build or repair any existing issues in your old home, you may like to contact Tioga Contractors. The company provides a good quality electrical service and is also available for emergency call out.

Don’t hesitate to contact the team today for more information about their electrical service!

Photo By Feverpitched at istock

One of the biggest enemies of your plumbing is tree roots. According to a study from the University of Florida, tree roots can grow up to three times the branch spread within only two to three years of planting. This means that the trees that are on your property can easily get into your plumbing. In fact, the tree roots will want to get into the plumbing because they’ll be able to get an endless supply of water to help them grow.

Tree root intrusions, however, are one of the most difficult plumbing problems to tackle. Your Hurst, TX plumber will need to act quickly in order to prevent the problem from worsening. Although you won’t be doing any of the repairs yourself, it’s still a good idea to gain a better understanding of the entire process.

#1. Identify the Type of Roots That Are in the Plumbing

One of the first things that your plumber in Hurst, TX will want to do is to identify the type of roots that are in your plumbing and where they come from. This can have an effect on how the repairs will go. Your plumber will want to figure out how thick the roots are and how long they have been growing. They may even try to determine the exact plant where the roots are coming from. The roots will grow back with time, so if you’re looking for a more permanent solution, you might want to consider getting rid of the plants that are causing the problem. If the roots come from large trees, you’ll want to speak with an arborist to see how you can remove the tree. However, if the roots come from small shrubs or bushes nearby, you can probably get rid of these plants by yourself.

Some of the finer roots that look like meshes are incredibly difficult to get rid of. They will bunch together and create some type of accumulate that resembles slush. On the other hand, some of the larger tree roots are actually easier to remove. Unlike the smaller tree roots, they do not have the opportunity to bunch together and become a huge issue.

#2. Figure Out the Location

Rather than try to figure out where the tree root intrusion is through guesswork. The plumber will want to use some type of tool that can measure how far along the plumbing their camera has gone. They’ll also take this opportunity to use landmarks in the plumbing to confirm the location of the blockage. This makes it incredibly easy for the plumbers to figure out which parts of the plumbing need to be removed.

The plumbers may need to consider whether they need to move anything above ground in order to get to the plumbing if they plan on drilling downwards or replacing that section of the plumbing because it is too damaged. They’ll consider how accessible the roots are as well. Using a combination of these factors, they’ll be able to come up with a reasonable and feasible plan.

#3. Take It One Step at a Time

Tree roots are notoriously difficult to remove. Most professionals won’t recommend trying to remove the entire thing in one-go, as this can put quite a lot of strain and pressure on the equipment. It might also be difficult to get the roots out, as they might cling onto the sides as well.

The best method is to remove small parts of the roots little by little using different types of specialized equipment and tools. How you remove the roots will also depend on the type of equipment that you have. For example, if you are using a traditional drain machine, it’s better to remove several inches of the roots at a time; however, if you have a powerful jetter, you can easily punch through the roots with ease.

#4. Think of a Long-Term Plan

As mentioned above, getting rid of the tree roots may not necessarily be a permanent fix. With time, roots from the same plant or from surrounding bushes and trees will still make their way to the plumbing and attempt to get inside. As a result, you might have to call a professional to deal with tree root intrusions in several years again. If the roots grow quickly, you might have to call a plumbing company within several months.

Due to this reason, it’s vital that you sit down and think of a long-term plan. This might be anything from removing the plants and bushes that are nearby to prevent the roots from entering the plumbing again. Or, it might involve installing insulation on the plumbing, so that it becomes much more difficult for any surrounding roots to make their way into the plumbing system. Many professionals will recommend a combination of both solutions. If you don’t want to get rid of the plants nearby, you can always try to relocate them.

Try to make an effort to prevent this from happening again in the future, as tree root intrusion repairs can be rather costly. If you’re constantly dealing with this problem, plumbing that isn’t even located at the site of the intrusion may also become damaged.

Schedule an Appointment with Us!

When dealing with tree root intrusions, it’s best to act as quickly as possible. The longer that you wait, the more that the tree roots will intrude into the plumbing and the more difficult it will be for a plumber to get rid of the tree roots. If you’re looking for a plumber in Hurst, TX to deal with tree root intrusions, give us a call at 469-789-1292 or schedule an appointment online!

Tioga Contractors has served the area for more than 60 years. We offer emergency plumbing services 24/7, 365 days a year. Our licensed plumbers have tackled all types of plumbing problems, from clogged drains to noisy plumbing to tree root intrusions, and will be able to handle and deal with any problem that you may throw our way!

Photo By leonard_c at istock

An electrician is the type of service professional you want to hire right away. They’re incredibly helpful to households of all sizes and necessary if you want to keep your home in excellent working order. You may be required by your insurance company to have routine inspections of the electrical, too. If you do, you’ll be one step ahead by knowing which professional to hire based on their reputation in the community.

What You Need to Know When Hiring a Service Professional for the First Time

If you haven’t needed to hire a professional electric service before, there are things you should know about the process so that you can make it quick and easy for you. The sooner you take the time to research potential candidates, the better. By the time you need a helping hand, you know who to call and why you’ve chosen them. It’s one less thing you’ll need to do with your busy schedule.

Here is how to hire an electrician in Bedford, TX:

  • Ask the people you’re related to, spend time with, work with, or live by to give you a recommendation based on their personal experiences. You’ll likely get varied responses that help you determine which company to give your business to today. The people that you know have prior experience dealing with electricians. Why not ask their honest opinion about the different companies in the area? You’ll find out rather quickly who can assist you with your request and how well they’ll do once they’re at your home working on your electrical system. Your family, friends, neighbors, and co-workers are an excellent source of information because they’ve been there and done that before.
  • Go online and see which options exist. Get to know the companies in the city by doing a local web search and then visiting websites to learn more about the hours of operation, years of service, and the electrical companies’ skills. It’s amazing how much information you’re able to obtain in a short amount of time by doing a simple web search. You’ll learn a lot about a company by taking a few minutes to visit its website and read its testimonials. It gives you an idea of what to expect from the electrician long before you need to call and request assistance from them.
  • Read reviews carefully, taking note of the language commonly used throughout. If you don’t have anyone you can ask about an electrician, don’t worry. The internet is an excellent resource for providing you with honest opinions about a company’s service record. All you need to do is visit online review sites and spend a few minutes going through the company’s feedback. You’ll see how a customer rated them and what they had to say about the level of service they received. You’re then able to decide whether or not to give the electrician a try based on what you’ve read online.
  • Call a few candidates and see who responds to your request for service the fastest. You’ll find out rather quickly who is available to help you with your electrical issue. Speaking to a company by phone is an excellent way to get to know what they can do for you. It gives you a feel for how they treat their customers, too, based on the length of the conversation and their willingness to provide you with accurate information. If you feel good about the interaction, you can hire the company and get your electrical issue resolved in no time flat.
  • Respond to an advertisement sent to you via US Postal Mail. You’ll learn all about a company and what it can do for you by looking at the direct mail advertisement you received instead of throwing it away. It could provide you with valuable savings coupons, which you don’t want to miss. It could be advertising a promotional offer that you wouldn’t otherwise know about if you threw it away. Call the number on the flyer and get your service call scheduled with the technician without delay.
  • Open up the phone book and see what names stand out to you in the business directory. You don’t need to use your phone or computer to look up information. If you have a phone book available, you can flip to the back where all the business listings are and start calling some of the names listed under the heading of ‘Electrician.’ It may take you longer than going online. However, it’s still an effective way of getting things done. You can get the answers you need in no time at all by using the phone book you have put away in a drawer somewhere. It’s an option for you to use if you’re away from the computer or using a landline phone, too.

An electrician in Bedford, TX, provides you with the knowledge, skills, and expertise to get the job done right. If you haven’t had a chance to speak to one by phone, now is the time to start vetting possible candidates to complete your job for you. That way, you get the assistance that you need to get the job done fast and correctly the first time around.

Who to Reach When You Need a Helping Hand with Your Electrical System

Contact Tioga Contractors with your request for electrical service today. Call 469-789-1292 to speak to one of our helpful representatives. We’ll answer any questions that you have about the service that we provide so that you feel prepared when our electrician arrives at your home in Bedford, TX. You’ll have one less thing to think about once you have your appointment scheduled.

Sit back, relax, and have faith that we will take care of your electrical issue in record time. You don’t need to worry about your electrical problem causing your bill to skyrocket or be a threat to yourself, your family, and your pets. You’ll have the issue with your electrical system taken care of long before it has a chance to grow in size or cost.

Photo By Warchi at istock

If everyone’s taking short showers before the hot water runs out, sometimes there’s only the water heater to blame. In a typical dual-thermostat unit, your hot water supply will be affected in unexpected ways if a single thermostat fails, since each one governs heating in the upper or lower sections of the tank. You may get less hot water, a longer wait for fully hot water, or something in-between. The same goes for problems with the heating elements controlled by the thermostats. These are just a couple of the issues that our water heater repair team can diagnose and repair, and maybe bring peace to your household in the process. Tioga Contractors has home hot water experts who serve the Bedford, TX area with water heater repair and replacement, and other hot water solutions.

Water Heater Maintenance, for More Quality Hot Water, Fewer Floods and Other Disasters

We tell our customers in the Bedford, TX area that we’re glad when we provide more maintenance calls and water heater repairs and make fewer emergency calls. There seems to be a connection. By having our team take a look at your water heater, you can make sure that your unit is heating properly and well-regulated by the thermostat, the anode rod is in good shape and keeping the water healthy and the tank as free of corrosion as possible, and the pressure relief valve is operating correctly, neither leaking not failing to open when necessary. We make sure that the tank is overall in good shape, and your hot water quality and pressure throughout the house is as it should be. Regular maintenance and water heater repair when needed can also help keep your energy costs down as we identify any problems that are making the unit work harder than it needs to while it tries to provide the hot water you need.

Popping Sounds Can Indicate that Water Heater Maintenance or Repair is Needed

Mineral deposits such as calcium and lime may accumulate at the bottom of your water heater tank and produce popping sounds as heater water bursts through the sediment. Much of the DFW area has some degree of hard water, so an unmaintained water heater is likely to be affected by this problem. The anode rod is also affected by hard water, degrading faster as it performs its sacrificial service to stabilize water quality in the tank. Water heater repair technicians should replace the anode rod periodically, at least every five years or more often as needed. Popping sounds do indicate pressure is building, which can increase and should be released by the pressure release valve. In rare circumstances, unvented pressure can rupture the tank, sometimes violently. Flushing the tank as part of the maintenance can help remove the sediment, and an inspection of the safety valve is important as well. If you notice signs of water venting often, or pressure-related sounds such as whistling, call for water heater repair right away.

Checking and Adjusting Hot Water Heating Elements

Your hot water heater has one or two thermostats and heating elements. Our technician will check the thermostat for accuracy and set it to a safe temperature that will supply quality hot water, in the zone between hot enough for good hygiene such as hand washing, and cool enough that it won’t scald anyone, especially any young or elderly people in your home. There are many ways to save energy costs with hot water, and setting the target temperature outside the safe zone is not recommended. Instead, consider insulation of the tank and pipes, installing a newer, more efficient model, or using small, local tankless hot water units in key locations such as under your kitchen sink to meet your hot water needs faster and in a more targeted fashion.

Tankless Hot Water Heater Repair and Installation

You may consider water heaters that, instead of heating a whole tank of hot water, use intense heat to bring water passing through to the desired temperature. Some families install them as their hot water source, or as part of their solution in conjunction with a tank-based system. Smaller units can also serve bathrooms and the kitchen as needed so that hotter water is available immediately without wasting water waiting for it to turn hot as the line is filled with water from a distant tank. In a home with children or seniors, local water heaters can allow the lowest hygienic setting for water from faucets to protect sensitive hands, while the local devices provide hotter water where desired, such as the parents’ shower or the kitchen sink. Tankless hot water systems can also help when family use of hot water varies, and keeping a full tank hot isn’t always efficient.

Ways to Make Your Hot Water Use More Effective

Rather than focusing on cutting back on shower use when the shower heads are ineffective, inefficient older models, our water heater repair crew can also tell you about that many ways that you can save hot water by spending a bit on your shower technology. The simplest way is to ensure that you have a low-flow shower head and that any flow restriction devices installed between older shower heads and your plumbing have not decayed into pieces that are blocking the shower spray internally. Larger shower heads, multiple heads, and even full-body shower spray can use more water, but provide the same coverage as a single-head shower in a fraction of the time. Instead of having a complex shower routine, you can cover all areas at once and rise off in a moment, perfect for getting going in the morning.

Our Team at Tioga Contractors Is Your Bedford, TX Water Heater Repair Experts

Let us help you get the most out of your hot water system and your showers, faucets, dishwashers, and washing machines. Call us today for expert maintenance, and avoid water heater emergencies.

Photo By Andrei Korzhyts at Shutterstock

From the moment your little one is born, your life will change in ways you never imagined. One is a more practical way, reflecting how much electrical power provides for our lives. Beginning in the nursery and evolving over time to when your child is getting ready for college, your home here in Euless, TX will need to support a wide range of devices, providing safety and comfort in the early years and adding support for learning devices, entertainment, communication, and lifestyle changes for your whole growing family. Your electrician can make a big difference in how your family life evolves with a few changes to your home’s electric service and wiring.

The Nursery Years

Your child’s first environment will need a number of devices for modern childcare, including of course a baby monitor, a source of soothing music, and environmental gear such as a humidifier and air filter if needed. You’ll also need power for any devices that the parents need such as bottle warmers and the ever present phone charger. All of those devices and more will need to be connected in convenient locations, rather than scattered around the room at available outlets. Our electrician can add outlets, increase dual to quad outlets, and also upgrade any existing outlets to childproof ones for the future.

As Children Get More Active

Wandering children are curious children, and childproof outlets will be the rule wherever your child could conceivably get in contact with them. These aren’t outlets with the old plastic inserts that have to be removed and set aside when the outlet is in use, then found again when the device is unplugged. These are modern outlets required by electrical code for new homes, with a mechanism that prevents single exploratory pieces of metal from being inserted. Only simultaneous entry into both sides, by a proper plug for example, can provide access to your home’s electric circuits.

Other safety measures include GFCI devices in your children’s bathrooms and in fact throughout your home, wherever water and electricity could mix, for everyone’s sake. A children’s bathroom should also have a water leak detector to sound the alarm directly or through your home’s alarm or smart home system, so that little explorers that turn on the water can’t make too much of a mess before people come running, informed by technology, to turn it off.

Your child may also benefit from interesting lighting fixtures, colorful lighting displays, and other distractions that make for a stimulating environment. If you enjoy implementing the latest technology, it’s a straightforward matter to install window shade controls that, with an intelligent controller, manage the amount of sunlight that enters the room during the day. Our versatile electrician can install these and other electrical devices and circuits as needed for a safe, convenient, and enriching environment for your child.

Family Time Is Special Time

One way that families get together and enjoy an evening together, relax and have fun on rainy days, and even learn and explore new worlds is through a home theater system. Properly installed, it can be a great resource and a way to stay social rather than focus on individual screens. Our electricians can install the power your system needs for the television, high-powered amplifier, content sources, and other equipment as well as wiring your system for networking and speakers.

We use our electrician’s skills to locate the wires behind your walls or in other safe locations that keep them out of the way of young children, making it easier to just relax and enjoy the show. You can also connect your gaming system when children get old enough to enjoy the active games that are available for them. Other family social environments include the kitchen and outdoor areas such as the deck, all of which can benefit from a visit by the electrician to provide convenient power outlets, weatherproof if appropriate.

Tweens Need Power

Tweens, spending time in their rooms studying, playing, and communicating, need well-located connections to electrical power for their devices, including chargers for their phones and computers. You may want quad outlets, or outlets that include USB power to minimize the clusters of “wall wart” power adapters, and you definitely should make sure your children minimize their use of extension cords and power strips that spread electrical risks across the room, creating potential hazards for shock, liquid spills into outlets, and poor connections that heat up and could cause damage. Extension cords also are prone to wear from chair wheels rolling over them and other abrasions, creating still more risks. Stay focused on wall connections, and you’ll keep them safer.

Teens and Tech Sophistication

Your teens also have the need for plenty of places to plug in, including their gaming systems, computers, televisions, and media sources. Gaming, remote health and education applications, and general video conferencing applications require plenty of network speed, so if your kids don’t have network access via a cable box, wired Ethernet may be a good idea. For teen rooms, our electricians can also add features like unique lighting fixtures, smart gadgets including light switches, and workspaces with pre-installed power for both regular and USB similar to those available at libraries and coffee shops. Once you see all that we can do for your kids, there’s only one problem: you’ll want upgrades for your master bedroom as well. That’s a great idea, and we’ll be glad to do it.

Your Versatile Electrician Can Help You Get Creative in Wiring Your Home for Your Family

Our Tioga Contractors team of electricians serving the Euless, TX area is ready to update your home for your changing lifestyle as your family grows. We’ll make sure that your electrical power is easily available, safely installed, and ready for the wide variety of devices a modern family enjoys. Give us a call to help your family with great ideas and professional work.

Photo By George Rudy at Shutterstock

You want an electrical system that can last a lifetime. In order to increase the lifespan of your electrical system, preventive maintenance care is important. Your electrical system handles a load of electrical energy every single day. Electricity is powerful and dangerous. Your electrical system is simply a series of cables, wires, and fixtures that allow you to enjoy electricity. These cables, wires, and fixtures can only handle so much. Over time, these features of your electrical system will become weathered and outdated. By utilizing the services of a preventive maintenance electrician, you can stay on top of old and weathered electrical system components and ensure your system is running efficiently and safely all of the time. If you live in or around the Bedford, TX, area, contact Tioga Contractors for all of your electrical service needs.

When to Contact a Professional Electrician

Understanding the signs of a malfunctioning or weathering electrical system will help you save money on repairs, reduce the number of electrical malfunctions you experience, and ensure your safety. Electrical malfunctions can cause electrical fires, electrical shock, and extensive property damage. If you notice any of the following signs of electrical system decay or failure, contact your local and professional electrical service provider.

Outdated or Old Wiring

If you live in an older home, chances are your electrical system is old as well. If you have yet to have an electrician inspect and maintain it, you should contact one right away. Old and outdated electrical systems can lead to wire fraying and snapping. Wires that are frayed or broken no longer have full control of the electrical current that is flowing through them.

Electrical wiring and cables in your home are designed to carry the electrical energy to the designated outlet or appliance. Any deviation in that path could lead to damage elsewhere. Losing wires can lead to electrical fire and shock if you’re not careful. This is due to the heat electrical energy generates. Frayed wires will leak electrical energy if they are not fully intact.

Other issues with the outdated and old electrical systems include the issue of receiving insurance for your home. Many home insurance companies won’t insure older homes due to their electrical systems. Old electrical systems usually have an amp of 60. The new standard electrical amp for a home is between 100 and 200 amps. This of course differs depending on the square footage of your home. Small modern homes will have 100 and larger homes may have more. New houses aren’t using the old standard of 60 amps, because that doesn’t seem to work well with newer appliances and modern electrical system needs. Trying to use modern appliances in an older home will put a strain on your electrical system if it isn’t updated. Contact a professional electrician for inspection and electrical system updates to ensure your system is efficient, safe, and insurable. This will give you peace of mind, help you live more conveniently, and help you when it comes time to sell.

Burning Walls and Outlets

Before an electrical fire starts, you may get clear indications that an electrical fire is impending if you see burn marks or smell on or around outlets and light switches. Burn marks are an obviously bad sign, however, you may be tempted to let it persist, so you can continue to use your devices. Many homeowners make the mistake of waiting to have this issue repaired and cause more damage in doing so. Do not allow this problem to persist. Burning outlets and light switches can damage your property and cause you harm. If you notice this issue, contact a professional electrician for emergency electrical system repairs.

Reasons your outlets may be burning or getting too hot have to do with the direction of your home’s electrical current. Electricity wants to get to the ground. This is why lightning strikes in the manner that it does. Its goal is to go into the ground. The direction of your electrical circuit must be directed toward the ground. This is why experts say your outlets must be properly grounded. An ungrounded outlet will direct the electrical waste into your electrical system and property. The electrical waste will cause walls and other components of your property to burn. It can also easily lead to an electrical fire or shock.

If you notice burn marks on your walls or outlets do not hesitate to contact an emergency electrician. The faster you act the less damage will occur. If you live in or around the Bedford, TX, area, contact Tioga contactors for urgent electrical services.

Power Surges and Overloaded Circuits

If your electrical system is constantly being overloaded, contact an emergency electrician for urgent service. The same goes for power surges. A power surge may take the form of flickering or dimming in lights. Power surges usually occur when you utilize multiple appliances with a high wattage at one time, regardless of which circuit they are on. An overloaded circuit is when one single circuit becomes overloaded with too much electrical energy. When this occurs in your circuit, breakers are usually triggered, and the entire circuit will be disconnected. Each of these electrical system issues indicates an underlying electrical use or misuse of your home’s electrical system.

Overloaded circuits and power surges do happen; however, they shouldn’t happen often. If it does happen often, it could be the direct result of an outdated electrical system, faulty wiring, or constant overuse of your electrical circuit’s energy. The cause may differ, but the result is always the same. A poorly maintained or neglected electrical system will cause more damage and exhibit more problems than one that is well cared for.

Electrical maintenance is extremely important. It is especially important for older homes as well as electrical systems that are exhibiting signs of failure and decay. If you notice burn marks and smells stemming from your electrical system, contact an emergency electrician as soon as possible and refrain from using that circuit until it can be repaired. Constantly overloading circuits and power surges should be addressed as soon as possible. The faster you make necessary electrical repairs, the safer and more comfortable you’ll be. If you live in or around the area and are in need of an electrician, contact your Tioga Contractors.

Photo By gorica at istock

Making sure the drains in your home don’t get clogged should be a top priority, even if it doesn’t seem like a very big deal. Slow or clogged drains get worse with time, and you can eventually end up with a sewage backup or corrosion that leads to expensive repairs. If you want to save money on drain cleaning service calls and prevent expensive plumbing repairs, here are some tips for keeping the drains in your home clean.


There are a few different things to watch out for when it comes to bathroom drain clogs. In most bathrooms, you have to deal with potential drain clogs in the sink, the shower and the toilet. Because of the way many homeowners treat their bathrooms, however, this can be a tough task.

Toilet clogs are usually a result of flushing things other than toilet paper down the toilet. Even if the wipes you buy are marketed as “flushable,” they’re not designed to break down in water the way toilet paper does. Instead, these products lead to massive clogs that only a drain cleaning service expert can remove.

Sink and shower clogs are usually caused by a combination of hair and soap, which can be a natural result of taking a shower or washing your hands. If you’re shaving in the bathroom, however, you need to do what you can to keep that hair from going down the drain and causing clogs. One of the best things you can do to avoid expensive drain cleaning calls as a result of hair and soap is install a drain catch in your shower.


Kitchens are another hot spot for clogs because so many homeowners don’t understand how to use a garbage disposal properly. While it might be tempting to scrape a plate full of food into the sink and run it through the garbage disposal, that’s not what garbage disposals are designed for. Instead, your disposal is meant to grind up any leftover bits of food that you couldn’t get off a plate or pan before rinsing it in the sink.

Before you rinse your dishes off, use a spatula or spoon to scrape as much food into the garbage as possible. You can install a drain catch in your kitchen sink to catch any leftover food before it goes down the drain. In particular, you should avoid putting the following things in your disposal:

  • Animal bones
  • Vegetables
  • Fats, greases and oils
  • Eggshells
  • Coffee grounds

Liquid Drain Cleaner

If you want to help keep your drain clean in between drain cleaning service calls, the best thing you can do as a homeowner is use a liquid drain cleaner from time to time. The problem is, using the wrong liquid drain cleaner could cause more problems, leaving you with a massive plumbing bill when you could have simply paid to have somebody clean your drains.

Make sure you avoid chemical-based drain cleaners. While Drano might be a popular name, this chemical-based cleaner can cause damage to pipes as a result of a chemical reaction. Eventually, corrosion can get bad enough that you can have leaks in drain pipes in your home, which is a problem no homeowner wants to deal with.

Using an enzyme-based liquid drain cleaner is the best way to go, since they break down clogs without damaging pipes. You can ask a drain cleaning service company about their preferred drain cleaner if you need help choosing one.

Cleaning Your Own Drains

One way to avoid expensive drain cleaning service calls is to clean your own drains, but you need to know what you’re doing. Cleaning drains can lead to serious pipe damage, which is a lot more expensive than the cost of a simple drain cleaning service. When it comes to cleaning your own drains, make sure you use the right drain cleaner and take extra care not to damage anything.

In addition to using an enzyme-based liquid drain cleaner, you can also use a plunger to unclog slow drains. Simply place the plunger over the drain to create suction like you would in a toilet, then plunge away until the clog starts to loosen. If you’re not able to get a clog out with a plunger and a good liquid drain cleaner, make sure you call a drain cleaning service company instead of trying to dive deeper.

When to Call an Expert

While you can do a pretty good job of cleaning your own drains, you don’t want to cause any massive drain pipe damage that leads to more expensive repairs. When in doubt, it’s always best to call an expert.

The most important reason to call a professional for drain cleaning services is the fact that tools such as snakes and augers are dangerous to run. You can cause serious pipe damage by running a snake in your drain lines, especially if you don’t know what you’re doing. A plumber knows the layout of your plumbing system and how to be delicate while removing clogs, so you don’t have to deal with the risk of busting a drain pipe in your Irving, TX, home when you get professional help.

Give Us a Call

Keeping your drains clean is a lot of work, but it’s well worth it when you consider the alternative. Clogged drains can lead to major problems, which is why Tioga Contractors works so hard to help you keep your drains clean. If you need drain cleaning services for your Irving, TX, home, we’re always a phone call away. Not only will we get your drains unclogged quickly, but we’ll also do it without damaging pipes or costing you a fortune. Next time you have a clog you can’t remove, call Tioga Contractors at 469-789-1292.

Photo By Lisa Culton at Shutterstock

The sooner you spot a problem in your Irving, TX, home, the less likely it is that you’ll have to deal with serious damage. The problem is, most homeowners don’t know a whole lot about their plumbing system and what kind of problems they need to look out for. If you want to make sure you’re spotting plumbing problems as soon as possible so you can call a plumber before things get too serious, here’s what you should watch out for.


Of all the plumbing problems you’ll probably deal with at some point, leaks are one of the most common. Leaks can occur in several different spots and for several different reasons, but it’s always important to get them fixed as soon as you can. As soon as you spot a leak in your home, you need to call a plumber to get it fixed.

The most dangerous leaks are the ones that occur in walls, crawlspaces and ceilings. These areas are tough to dry out, which means water can build up and cause significant damage to building materials. In some cases, you may even have mold growth in your home as a result of a leak that you didn’t stop in time.


Clogs are another common plumbing problem that a lot of homeowners underestimate. A clogged or slow drain might not seem like a big deal at first, but it can quickly become a big deal if you don’t take care of it. Over time, clogs get worse and can eventually completely stop drain pipes from working. Before you let a clog get too bad, call a plumber to have your drains cleaned.

It’s important to note that you need to be careful if you decide to clean your own drains. As a homeowner, you shouldn’t go beyond using an enzyme-based liquid drain cleaner and a simple plunger to unclog a drain. If you can’t get a drain clog removed using these simple tools, that’s a sign that it’s time to call a professional to run a snake or auger in your drain.

No Hot Water

Hot water is essential to your daily routine, whether you’re washing the dishes at night or taking a shower when you wake up. This is why it’s important to keep up with water heater maintenance. Every once in a while, you should have a plumber flush your water heater to get rid of any built-up sediment. This routine flushing helps prevent corrosion, which means your water heater will last longer and you’re less likely to be stranded without hot water.

If your hot water suddenly stops working, chances are it’s a result of a bad heating element or thermostat in the water heater. You can replace a thermostat or heating element for a fraction of the cost of a water heater, so it’s worth doing if that’s your problem. However, any tank-related problems are a sign that it’s time to replace your water heater.

Low Water Pressure

You need good water pressure throughout your home to get things clean, whether you’re washing dishes or taking a shower. If you’ve been noticing your water pressure getting worse or if your water pressure suddenly dropped drastically, you need to call a plumber to figure out what’s causing that drop in water pressure.

If the low water pressure in your home is confined to a single fixture, there’s probably corrosion or clogging inside the fixture. Sometimes you need to replace an entire fixture, while simply replacing an aerator may fix others’ problems. Water pressure issues throughout your home are a sign of water line problems, which means you may need to have new water lines run.

Hard Water

One problem a lot of homeowners have to deal with is hard water. Hard water is a term for water with a high mineral content, and it can be a major problem for your plumbing system. Because of its high mineral content, hard water has a tendency to leave a mineral deposit in pipes, fixtures and appliances, which means it can cost you a lot of money in plumbing damage. The good news is, there is a solution.

The best thing to do if you have hard water in your home is have a plumber install a water softener. Water softeners are designed to remove some of the minerals from your home’s water supply, which means you get cleaner water running through your pipes that won’t cause clogs or corrosion. If you’re not sure whether or not you have hard water, you can always have a plumber test it for you.

Burst Pipes

Perhaps the most devastating plumbing problem you can have is a burst pipe. Burst pipes happen when the water inside a pipe freezes and expands, cracking the pipe and leaving it vulnerable to leaks. The problem is, burst pipes spew out enough water that they cause serious water damage as well as a spike in your water bill.

You can prevent burst pipes by having a plumber insulate any exterior pipes in your home. Simply insulating the pipe or the wall the pipe is located in is usually enough, although you can also install heat tape around the pipe to make sure it doesn’t freeze.

Get Help Today

Owning a home is a great experience, but it also comes with a lot of responsibilities. One of the most important things you can do as a homeowner is to keep an eye out for problems so you can call a professional if anything goes wrong. Lucky for you, the plumbers at Tioga Contractors are more than happy to help you take care of your Irving, TX, home. Next time you have a plumbing problem you’re not sure how to conquer, give Tioga Contractors a call at 469-789-1292.

Photo By Andrey_Popov at Shutterstock

Is your water heater running, ok? Is it efficient? Has it malfunctioned in the past year? Are you getting enough hot water? When’s the last time you had it maintained? Is it time to replace it? If your water heater is more than 7 years old, these are the questions you should be asking your local plumbing professional. Water heaters usually last an average of 9 – 12 years. Being proactive in the maintenance of your water heater may help it last for much longer than that. The key to increasing the lifespan of your water heater is preventive maintenance and quick repair. Water heaters are complex machines that help us live our everyday life in comfort. Water heaters should be inspected and maintained on a yearly basis by a professional plumbing contractor. If you live in or around the Bedford, TX, area, contact Tioga Contractors for all of your water heater repair and maintenance needs.

Understanding how your water heater works and when to contact a professional water heater professional will not only help you keep your appliance longer, it will also help you save money on energy, prevent water heater malfunctions, and help you save money overall.

The Conventional Water Heater

The way your water heater operates may differ slightly, depending on the type of water heater you have. The most commonly used and owed water heater is the conventional or storage tank water heater. This water heater’s most prominent and identifying feature is its huge storage tank. These types of water heaters are typically found in the basement and garages of a household. Storage tank water heaters usually hold about 40 gallons of water; however, larger ones can hold up to 60 gallons. Water heaters can be powered by gas, electricity, or any type of alternative energy. When installing a new water heater keep these things in mind. You do not have to get the same type of water heater you previously had; you can have your professional plumber upgrade your water heater to a newer and more modern version.

The Tankless Water Heater

Tankless water heaters are more modern than the original conventional water heater design. Although both types of water heaters have their pros and cons, the tankless water heater may be more useful for certain homes and lifestyles. Tankless water heaters do not have tanks and do not need a tank to provide your property with hot water. Conventional water heaters store and heat eaters in the 40–60-gallon tank, whereas tankless water heaters utilize coils to heat water. Tankless water heaters are also known as on-demand water heaters because the hot water is literally heated on demand. There is no storing involved. Tankless water heaters seem to provide a virtually endless supply of hot water. Tankless water heaters are perfect for large households and bigger properties.

If you live in or around the area, and are interested in upgrading your water heater appliance, contact a Tioga Contractors, to hire a water heater repair and installation professional you can trust.

When You Should Contact an Water Heater Repair Technician for Urgent Repair

No Hot Water

One of the most common and serious issues water heater appliances seem to have, is having no hot water. If you own a conventional water heater, hot water may have just run out, however, if the hot water doesn’t return within an hour or so, contact a professional water heater technician.

Water heaters do not take long to heat and refill the water in the water heater tank. It should tank an hour or two at the most. Tankless water heaters are an entirely different story. Tankless water heaters virtually never run out of hot water. If it does, you can bet that there is something seriously wrong.

Other reasons your hot water may be off, could be an issue with the ignitor, or heat source, a leaking tank, or other malfunctions. If your hot water has disappeared and you live in the Bedford, TX, area, contact Tioga Contractors for urgent water heater repair.

Little Hot Water

If your hot water does work, but it just isn’t enough, you may need to have your water heater repaired or replaced. Perhaps your household has grown larger or you’re moving into a larger house with a 40 gallon water heater appliance. The amount of hot water used, compared to what’s available, will differ. More people and more appliances means more hot water used. If your household has grown in size, it may be time to either get a larger water heater or replace it with a newer more efficient one.

Other reasons your hot water may run out too quickly could be due to a water heater tank leak. Water heater tank leas are serious faults. Unfortunately, if your water heater tank begins to leak, your water heater repair professional will have to replace the entire tank. This is why proper water heater repair and maintenance is so important for these appliances.

Your Water Heater Is Making Noises

Your water heaters could be making a series of noises, However, the most common problematic noise you may hear coming from your water heater is banging or pebble lie sounds, emanating from your water heaters tank. This rumbling and tumbling noise is created by sediment and minerals that have collected and clumped together. The noise is an indication that your water heater appliance is in major need of a flush. Water heating appliances must be flushed periodically to prevent minerals and sediment from collecting inside of the water heater. Water naturally has minerals and sediment inside. The heating of these minerals can make it become a permanent fixture of your water heater tank without proper maintenance. Flushing your water heater periodically stops this from happening and subsequently prevents water heater tank leaks. It’s important that a water heater appliance flush is conducted by a professional water heater repair technician because the water can be extremely hot.

Contact a professional water heater repair and maintenance technician to help you prevent common water heater malfunctions and faults. If you live in or around the area, contact Tioga Contractors, to assist you with all your plumbing system and electrical system needs.

Photo By Mikhail Dmitriev  at istock