electrical contractors

Installing your appliances might seem cost-effective to save some money, but it can lead to bigger problems later. It’s one of those things you don’t think about until it happens. You go to do the laundry or make dinner, and suddenly your appliance isn’t working as it should. Maybe you’ve even had an appliance catch on fire in your home. Believe it or not, faulty installation is a leading cause of these disasters. This article will discuss seven house appliance risks that can be avoided with proper installation by electrical contractors. Keep reading to learn more!

House Appliance Risks You Can Avoid with Proper Installation

Dishwashers Can Leak if not Properly Installed

Dishwashers are one of the most commonly used appliances in the kitchen. They are a necessity in many homes, and they make life much easier by taking care of the dishes for you. However, dishwashers can also be a source of water leaks if they are not correctly installed. A dishwasher leak can cause extensive damage to your home, and it is crucial to take measures to avoid this type of leakage.

One way to avoid a dishwasher leak is to ensure that electrical contractors properly install the appliance in Arlington, TX. This will ensure that the dishwasher is appropriately sealed to prevent potential leaks. Another way to avoid a dishwasher leak is to check the appliance for any signs of leakage regularly.

If you notice any water around the dishwasher base, it is crucial to address the issue immediately with the help of an electrician. By taking these steps, you can help prevent a dishwasher leak from causing damage to your home.

Washing Machines Can Cause Water Damage if Not Level

A washing machine is one of the essential appliances in any home. It helps to keep clothes and linens clean and fresh. However, a washing machine can also be a source of water damage if it is not correctly installed. When a washing machine is not level, it can vibrate and shake during use. This can cause the water hose to become loose or come disconnected. As a result, water can leak out onto the floor, causing damage to the surrounding area.

Additionally, an unlevel washing machine can place stress on the door seal, leading to leaks. To avoid these problems, hire electrical contractors to install your washing machine. They will level the appliance to ensure it operates properly and does not cause any water damage.

Ovens Can Cause Fires if not Properly Installed

Though they are a vital kitchen appliance, ovens can pose a severe fire risk if they are not correctly installed. When an oven is not installed according to the manufacturer’s instructions, there is a greater chance that something will go wrong and cause a fire. In addition, improper installation can void the warranty, leaving the homeowner responsible for any damage. It is essential to hire electrical contractors to install your oven to avoid these risks. An electrician will ensure that the appliance is connected correctly and that all safety features are in place. Though it may cost a bit more upfront, proper installation can save you a lot of money and hassle in the long run.

Refrigerators Can Increase Your Energy Bill

Most people know that their refrigerator is one of the most energy-consuming appliances in their home. What they may not realize, however, is that improper installation can cause even more energy waste. A refrigerator that is not correctly installed can increase your energy bills by 30 percent. There are a few things to keep in mind when installing your fridge to ensure it runs efficiently. Improper installation can cause the fridge to work harder than necessary, using more energy.

Additionally, an improperly installed fridge can cause the door seal to be less effective, allowing cold air to escape. As a result, your fridge will have to work even harder to maintain the proper temperature, leading to higher energy bills. It is essential to hire electrical contractors in Arlington, TX to install your refrigerator to avoid these problems. They will ensure that the appliance is installed correctly and running as efficiently as possible.

Dryers Can Cause Fires If Not Properly Vented

A dryer is another appliance that can pose a serious fire risk if not properly installed. When a dryer is not adequately vented, the hot air produced during use can build up inside the appliance. This can cause the dryer to overheat, leading to a fire. Additionally, an improperly installed dryer can cause lint to build up inside the appliance. This can also lead to a fire, as the lint is highly combustible. The best way to prevent this is to have your dryer installed adequately by electrical contractors. They will make sure that the vent is installed correctly and clear of any debris. They will also give you advice on keeping the vent clean and clear of lint.

Water Heaters Can Explode or Catch on Fire if not Installed Correctly

No one likes the idea of their home appliances exploding. Water heaters are particularly prone to this type of disaster, but it’s something that can be avoided with proper installation. In most cases, water heater explosions are caused by a pressure buildup within the tank. This can happen when the temperature is too high, or the tank is not vented correctly.

As the water inside the tank heats up, it expands and creates pressure. If this pressure is not relieved, it can cause the tank to rupture. To avoid this, it’s essential to have your water heater installed by electrical contractors. They will ensure that the tank is vented correctly and that the temperature is set at a safe level. Second, regular maintenance is critical to keeping your water heater in good condition.

Hire An Electrician for Home Appliance Installation in Arlington

When it comes to appliance installation, it’s always best to hire electrical contractors. Qualified technicians have the experience and expertise to ensure that your appliances are correctly installed and running safely and efficiently. Electrical contractors can also provide advice on keeping your appliances in good condition and how to avoid potential problems.

If you’re looking for qualified appliance installation in Arlington, TX, look no further than Tioga Contractors. Our skilled technicians are ready to help you with all your appliance needs. Contact us today to schedule a consultation.

Photo By Malikov Aleksandr at Shutterstock

One of the first impressions you receive from home is its curb appeal. Most people boost their curb appeal to sell their houses quicker. However, outdoor lighting trends are not only aesthetically pleasing but also ensure your home is secure. With the right electrical contractors, outdoor lighting can be an asset to your property.

Why You Should Add Outdoor Lighting to Your Property

Here are a few reasons why you should consider outdoor lighting for your property:

They Improve Safety and Security

An unlit property poses several safety risks. First, it poses a tempting opportunity for burglars to prowl about your property. A well-lit property helps deter criminals from attempting to steal your car or enter your home. Dark stairs and walkways also make it hard for family and visitors to see where they are going and may even trip and fall. Well-installed outdoor lighting around your front steps and patio enhance safety and give your space a rich feel.

Motion sensors are used to light the way for a homeowner taking out the trash or even visitors looking to enter your home. However, they are also a great deterrent for unwanted intruders since they can illuminate all the dark corners of your property.

Offer Elevated Aesthetics

Outdoor lighting doesn’t need to be harsh or utilitarian. Your Arlington, TX property can look soft and inviting when done using professional electrical contractors. You could consult a landscape lighting designer to design an outdoor solution that works with home and the outdoors.

Strategically positioned lighting can add depth, highlight beautiful features and create an alluring ambiance. They can also be used to highlight the beauty of a pool and highlight tree silhouettes.

They Help Illuminate the Way

Outdoor lighting offers you the choice of installing path lights to illuminate the way to the door and avoid the risk of tripping. They can also be used to mark boundaries such as the driveway to help a driver see better. Path lights come in various styles to match the style of your home. They can either be below on the ground or raised on posts. Since it doesn’t snow much in Arlington, but it rains heavily, you may consider having electrical contractors install your lights on posts.

Increased Home Value

Professional outdoor lighting can add value to your home in many ways. It can enhance design elements, make your space look larger, increase the usability of your outdoor spaces after dark and add beauty. It is also one of the best ways to impact the value of your property. An added coat of paint and well-positioned lighting can increase the value of your home.

Increase the Usability of Your Outdoor Spaces

There’s no better place to relax, entertain and explore than your own front or backyard. Whether it’s a bonfire with friends or a barbeque under the stars, a well-lit outdoor space with the help of expert electrical contractors can set the tone for wonderful experiences.

5 Outdoor Lighting Trends to Enhance Your Outdoor Space

Low Voltage LED Lights

Instead of using incandescent lights, use low voltage LED lights to create or enhance focal points such as decks, swimming pools, fire pits, patios, and fountains. Did you know that LED lights use 75% less energy than incandescent lights and last almost 25 times longer?

During the holiday season, you can also use different colored LEDs to create a holiday mood and as a form of decoration as well.

Smart Security lighting

You can take the security of your home a notch higher by adopting smart security upgrades instead of traditional security lighting. While traditional security lights installed by electrical contractors are mounted on walls and go off when there is movement, smart security lighting allows you the ability to control your lights at the touch of a button on your phone. If an animal has triggered the lights, you can easily turn them off, adjust the lighting and even use voice control to operate the lights.

Path Lights

You can use stylish LED lights to illuminate your pathways. They do not need fancy wiring, are easy to push into the ground, and produce dim lighting that doesn’t cause glare or result in light pollution. If you are an eco-friendly enthusiast, you can consult electrical contractors to adopt solar-powered lighting that is eco-friendly and energy-efficient.

Landscape Light Fixtures

Light fixtures installed around shrubs, trees, and other landscapes can help accentuate the décor and plants in your yard. A great way to adopt this would be to add ornamental décor that glows in the night and add lighting to your trees and shrubbery. Lanterns can also help you make the most of your yard.

Lighting for the Stairs and Deck

To avoid tripping on the steps at night, electrical contractors can add lighting to your stairs and deck. You can also angle some of the lighting in your yard to light up these areas. Often, lighting for these areas is usually embedded into the concrete. If your stairs or deck are already built, you can attach your lights to the platform or the ground around.

String Lights

You’ve probably seen string lights on a restaurant patio, and their effect on a space is undeniable. You can easily have this ambiance on your front porch or backyard. Hang string lights around or near your outdoor seating in your yard. This may be on trees, poles, or the balcony. Ensure they are waterproof, solar-powered, and long-lasting to get the most use out of them.

The Best Electrical Contractors in Arlington, TX

Undoubtedly the leading electrical contractors in Arlington, TX, Tioga Contractors deals with all electrical services, including electrical wiring, light installation, TV installation, and repairing A/C and heating circuits, among many other services. We are always constantly adapting to new technologies and are equipped with the correct tools and the right attitude to deal with any electrical issue you may be facing. Get in touch with us today for more information about our services.

Photo By Vach cameraman at Shutterstock

Are you considering smart home devices for your house? If you’ve been struggling to plug in phone chargers, networking gear, and other new equipment for your not-so-new home, adding smart home equipment is going to make you wish you had a home designed for all this equipment, with wiring and electrical outlets planned to support your lifestyle. What you need is electrical contractors in Arlington, TX who can relate, and can design an upgrade for your home to handle these items along with home theater and other AV equipment, smart appliances, built-in control panels, and much more. Tioga Contractors are the electrical contractors you’re looking for, ready to blend your smart home and other tech equipment into your existing wiring, and run wiring for Wi-Fi access points and other support gear to make sure it all works reliably.

Electrical Outlets Versus Endless Expansion with Extension Cords, a Safety Issue

With smart devices, there’s even more of a temptation to use expansion devices to get the space you need to plug them in. The usual cautions apply, though, because extension cords and even power strips don’t provide all the protections that outlets do. They are more easily subject to damage including wear, even if the cords are routed under rugs which actually hide damage and make the risk of fire or shock harder to notice. Liquids can more easily enter these devices, they usually don’t provide the child-resistant features that modern outlets do, and of course, they make it easier to overload circuits or even their own wires if higher-powered equipment is in use.

In addition to these factors, orderly wiring is always a priority of ours as safety-oriented electrical contractors, and extension devices typically aren’t orderly or easy to handle. Our electrical contractors can install dual or quad outlets, including those with additional features such as network connections, that will last a long time without so many risks, and we can add what you need. Our expert electricians can even add additional circuits where you need them, efficiently and professionally. If you’re using power strips for their surge protection, here’s a suggestion for improving your protection: we can add whole-house surge and lightning protection that covers even that smart speaker in the kitchen or bathroom where you don’t use a power strip because of the nearby water.

Conveniently Located Power for Smart Devices

Smart speakers, lights, and displays need to be convenient, and sometimes having to plug them in leads to inconvenient locations or long wire stretches. If you’ve decided where you want them, why not have our electrical contractors put in electrical outlets right there? It gives your home a customized feel and makes it easy to upgrade your devices when the time comes. We can also install wiring for smart panels that mount in your wall, allowing you to control your home and check the weather or whatever else your devices offer, whenever you’re passing by.

If your home is older and doesn’t have all the protections that modern wiring offers, our electricians can help with that at the same time, adding GFCI outlets for kitchens, bathrooms, and outside, or on a per-circuit basis since the feature is available built-in with some circuit breakers. There’s also AFCI, offered alone or in combination on your circuit breakers, that “listens” for signs of trouble like loose and shorting wires, and shuts off power before a fire gets started from the wiring problem. Our electrical contractors can then perform a simple service of locating and fixing the fault, rather than repairing damaged wiring or worse if things get out of hand.

Networks and Other Low-Power Wiring

As electricians, we’re experienced with all types of high and lower power wiring and equipment, and artists at running wires through your walls and in other spaces, out of sight. If you need to run network cabling to support multiple Wi-Fi access points in your larger home, we can help do so effectively, with careful attention to factors that many people don’t consider, like the special ratings that cables have for walls and ceilings that affect your family’s safety in case of fire.

Smart Fixtures and Other Updates to Your Family’s Home

For smart lighting fixtures, installing smart bulbs in locations that require some skill to reach, and other smart home updates that require electrician expertise, we’re ready to help get them in place professionally, whether it’s recessed lighting, accent lighting outside your home, yard or patio lights, or smart speakers installed for a smooth, professional look with wires concealed.

When Your Smart Home, Learning, and Entertainment Technologies Merge, We Can Help

If you’ve been adapting to the existing wiring in your home, we can help. Limitations for many homeowners include standardized outlet distribution from years ago, lack of wiring for networks and AV, and a need to do more wirelessly than you are comfortable with or are able to make perform well. Let our expert team design a new wiring plan for your home and install the connections you need for the speed, security, and enjoyment that you and your family want. That includes home office features that bring your home up to the standards that we follow in commercial buildings we service.

Electrical Contractors for All Your Technology Wiring Needs in Arlington, TX

Hire the same electrical contractors that area companies, as well as homeowners, trust to keep their wiring up to date, safe, and reliable. From upgrades to support appliances and high power usage like EV charging stations, to convenient and safety-oriented home electrical circuit wiring, panel upgrades, and replacements, and low-power wiring for networks and other systems, we’ve done it all. Our electricians, planners, and other professionals work together to make sure your home’s features are just what you want and need. At Tioga Contractors, we’re the electrical contractors of choice for Arlington, TX. Give us a call today and find out all we can do for you!

Photo By Marcus Millo at istock

The importance of your home’s electrical system cannot be overstated. In addition to ensuring that your house is well lit, it ensures that all your electrical appliances and devices are adequately and safely powered. Therefore, when there is an electrical fault in your house, it can lead to serious inconveniences and even put your appliances at the risk of getting damaged. Electrical faults can also put your house in danger and even lead to serious injuries. But given how dangerous handling electricity can be, it is imperative for you to avoid DIY electrical repairs. As such, you need to ensure that you call reliable electrical contractors as soon as you realize that you have an electrical problem in your Arlington, TX house. Below are some of the most common issues that should prompt you to call electrical contractors as soon as possible.

Flickering Lights

Flickering lights are some of the most obvious signs of electrical faults in homes. If the issue is affecting only one lighting fixture, fixing it will be straightforward. However, if the issue is affecting several or all lighting fixtures, then it might be more complex since the problem could be within the circuit or further behind in the breaker box. Whatever the cause might be, you definitely do not want to live with flickering lights in your house. As such, you need to call professional electrical contractors as soon as you notice that your lights are flickering. Professionals have the necessary skills and tools to carry out the necessary tests, isolate the exact cause of the issue, and ensure that it is fixed decisively.

Unexplained Power Outage

Power outages can occur due to several issues. For instance, during a storm, damages to the power lines can cause a neighborhood-wide power outage. This kind of power outage should not worry you since it will be handled by your utility company. However, if your home is the only one without power in your neighborhood, then there could be a serious electrical fault in your house, and you will have to call professional electrical contractors to help you diagnose the problem and repair it accordingly. Whatever the cause of the power outage in your house might be, you can count on professional electrical contractors to apply their skills and experience to ensure that it is isolated and repaired to restore power in your house within the shortest time possible.

Circuit Breaker Tripping Frequently

A circuit breaker is your home’s first line of defense against electrical faults. It is supposed to protect your electrical systems and electrical appliances from getting damaged when there is an electrical fault in your house. It does this by simply breaking the circuit. Therefore, when your circuit breaker trips, it is just doing its job to keep your electrical system and property safe. However, this does not mean that the circuit breaker should trip all the time. Therefore, if your circuit breaker is tripping frequently, then there could be a serious electrical fault in your house. But unless you are a professional electrician, you will need to call professional electrical contractors to help you find out what the cause of the issue is and ensure that it is addressed decisively.

Burning Smell

A burning smell in your house is one of the most worrying signs of an electrical problem in homes. In some cases, it can occur due to minor electrical issues such as a blown fuse. In other cases, the smell can occur when wires overheat and burn the insulating materials. If this is the case, failure to address the issue immediately can lead to a fire. To prevent such an eventuality, you need to call professional electrical contractors as soon as you realize that there is a burning smell in your house. A professional will easily assess the extent of the problem and advise you on what needs to be done. If the insulating material has been extensively damaged, then your house might need rewiring. If the smell is just from a blown fuse, replacing the fuse might solve the issue.

Sparks

Sometimes, you might notice some sparks coming out momentarily when plugging in an electrical appliance to a power outlet. In some cases, it is perfectly normal. For instance, blue sparks are usually caused by a process called arcing, and you should not worry about them. However, if the sparks are of a different color and they seem to be lasting longer than a fraction of a second, then you need to be worried since they might be a result of poor installation or even wear and tear. In such a situation, you will need to call professional electricians to help you diagnose the issue and fix it accordingly. Professionals deal with such issues daily, and they know what needs to be done to ensure that they are fixed in the most efficient way possible.

The Bottom Line

Overall, it is apparent that there are many electrical issues that can negatively affect the efficacy of your electrical system and even put your property in danger. Given the importance and sensitivity of your electrical system, it is imperative for you to ensure that electrical problems are fixed as soon as they have been identified. Otherwise, electrical issues can end up costing you a lot of money if they are not addressed with the urgency they deserve. But no matter how quickly you want your electrical system to be fixed, you should never try DIY electrical repairs. As such you need to be in touch with professional electrical contractors you can call any time you have an electrical problem in your house. If you are looking for reliable electrical contractors in Arlington, TX, Tioga Contractors is an excellent choice. We have been offering electrical services for many years, and we are a household name in our community. Feel free to contact us today for more information about our company and the services we offer in Arlington, TX.

Photo By WIROJE PATHI at Shutterstock

An electrical panel is a crucial component of the electrical system, and it works to provide electricity and enhance safety. But, It’s usually the last thing you would think of since you only turn on or switch off the lights then resume your daily activities.

The average lifespan of electrical panels is about 40 to 60 years, but corrosion due to humid conditions and dust may shorten its lifespan. Age should not always be a determining factor to know when to hire electrical contractors to make replacements. Some electrical panel models may be faulty, and you may need to replace them with modern ones that comply with the current safety guidelines.

If your electrical panel is undersized, cannot handle your energy demands, or lacks safety standards, you need a replacement, regardless of the age. Whichever the case, electrical panels may not serve you forever. You will need to replace them eventually. In most cases, you may never know the perfect time to contact an electrical professional to update faulty or failed panels. But, if you notice any of the following signs, you should consider replacing your current electrical panel.

Frequent Circuit Breaker Trips

The most common sign your electrical panel is faulty and needs a replacement is when you constantly experience breaker trips. Circuit breakers are designed to trip on detecting a difference in the flow of current, thereby protecting the system from overheating or damaging your appliances.

The breaker only trips if the energy demands in your home are higher. If this happens, you can reset it to restore the power in your home. But, if you notice that the breakers trip frequently, it could be a sign that you need to upgrade your electrical panel.

It could also indicate that your current household appliances demand more volts than the capacity the existing electrical panel can handle. So, if you have issues with circuit breakers, consider consulting with professional electrical contractors in Arlington, TX, to inspect the electrical system. An expert can identify the cause of the problem and make necessary upgrades to ensure your home gets sufficient electricity.

The Panel Feels Hot or Warm to Touch

You do not need to see a burning fire to know you have an electrical problem. Some homeowners take the issue lightly. Most of them think that just as the bulbs often feel warm, it makes sense to have an electrical panel that feels hot to touch.

But you should be aware that light bulbs are not similar to electrical panels. Excessive heat can turn into a big flame. So, if the system feels hot, consider that a red flag, and you may need to seek help from an electrical contractor near you.

With a system that’s up to its task, you can never have hot electric switches, panels, and receptacles. Your electrical panel should handle the energy needs of your home. If it fails, heat may build up and can melt the wiring insulation. When that happens, it can put your home at risk for electrical fires. Consult electrical contractors to troubleshoot the issue right away.

Dimming or Flickering Lights

Unless you have a dimmer switch, you should never have an issue with dimming lights in your home. When you have dimming or flickering lights, it could indicate a problem with the electrical panel or the utility company. It can happen when there is a lightning storm or heavy rain, but the problem can go away once the rain or storms stop.

However, if the lights dim when you plug in some appliances such as TV, microwave, or a toaster, that’s a sign of a faulty electrical panel that needs an upgrade. Ignoring the issue can result in overheating and may even cause fires.

Also, when the lights flicker, check to confirm if it’s a single bulb or multiple bulbs. If it happens in all rooms, then you’re dealing with a severe problem. In any case, you notice flickering or dimming lights in your home, do not ignore it. Get in touch with an experienced electrician to rectify the issue.

Reliance on Extension Cords

Extension cords are common in most, if not all, homes in Arlington, TX. Although they are convenient, they are not always safe. They can scatter all over the room, especially when you have too many energy users. Also, it can create a safety hazard if you have children around.

Over-reliance on extension cords to power many appliances can overload the system, resulting in breaker trips. Consider asking electrical contractors to upgrade your home’s current electrical panel.

Electrical contractors can also install extra sockets and circuit breaks in areas that require more power. By doing so, you can minimize the risks associated with power strips and excessive use of extension cords.

Rust or Corrosion on The Electrical Panel

Another sign you may need to contact electrical contractors is when you spot rust or corrosion outside the electrical panel. The presence of rust in the system can disrupt the current flow and may even result in overheating.

In worst scenarios, overheating can occur inside the electrical panel and can cause fires. So if the system has rust on the outside, be sure to reach out to electrical contractors to inspect the interior parts of the electrical panel. Corrosion can make the system inefficient, so it would be wise to seek help sooner.

Burning Odors and Sparks

Burning smell or sparks is never a good sign, especially if it concerns electricity. Therefore, do not delay if you can see sparks or notice a burning smell coming from the panel; that’s a red flag.

Experienced electrical contractors in Arlington, TX, can offer you a remedy. A malfunctioning electrical panel can cause fire, putting your family, property, and your neighbors at risk. A burning smell can also be a sign of melting wire insulation behind the walls. Talk to a certified electrician to replace your electrical panel.

Get an Electrical Panel Upgrade Today

If left unresolved, electrical issues may not just be inconvenient but can also put you and your family at risk. Don’t ignore if you observe any of the above signs in your home.

For your electrical upgrades, work with electrical contractors at Tioga Contractors. We are a family-owned company that’s been operating since 1953. If you ever need to upgrade your electrical panel, our trained technicians can help you. In addition, we provide prompt, 24/7 emergency electrical services. Get in touch with us.

Photo By wibs24 at istock

At Tioga Contractors, protecting families from electrical fires and risk of shock in Arlington, TX is a top priority. Our electrical contractors know that tens of thousands of homes catch fire each year due to electrical problems. Some of the most common dangers come from faulty circuit breakers, old, miswired, or insufficient outlets, and power problems that lead to surges and “brownouts.” When we’re performing new wiring and fixture installation in your home, we follow professional standards and check our work. When we’re dealing with existing wiring, even in a new home, our habits continue as we check that work, too. If you, as a homeowner, want our electrical contractors to explicitly review your home’s wiring condition for major issues and minor but dangerous flaws, we can perform a professional electrical inspection that is likely to open your eyes.

Outlet Issues, Old and New

Electrical outlets are designed to take a lot of use as your devices are plugged and unplugged. They started as a simple power source with two equal openings for two prongs on the plug. Over time, standards led to polarized plugs, the third prong for ground protection, better ways to connect the wires to the outlet, and requirements for more outlets so each one wouldn’t get overloaded. Materials improved to last longer, and the latest outlets that our electrical contractors now install even include a mechanism that blocks kids probing with a piece of metal, holding out until they detect a proper set of prongs indicating that a real plug is being connected. In an older home, original outlets can have unreliable or corroded connections, damaged plastic allowing short circuits, plus a lack of grounding that can lead to fire and other risks.

In newer, or even brand new homes, wiring problems can include improper connection of wires to the outlet so they have a tendency to get loose and heat up over time, nicks in the wires so they have a tendency to break, and insulation damage that could result in a short circuit. Outlets that aren’t properly installed can shift and loosen wires, or cause intermittent and dangerous contacts. When our contractors check out the whole circuit, the outlet, wire, and circuit breaker should all have compatible ratings, so the circuit breaker doesn’t allow more current to be drawn than the circuit components are designed for.

Past Damage That Was Never Attended To

In addition to nicks and insulation damage that can create risks in recently installed wiring, older circuits in your home may have hidden problems that may or may not result in overheating or fire, but definitely aren’t worth the risk. One of the more common problems our electrical contractors find is damage from plumbing leaks, where water has traveled through walls and into outlets, fixtures, junctions, even circuit breaker panels. Water can also be absorbed into the wire’s insulation, causing corrosion and, over time, even significant damage to the wire. Wires can get damaged from cuts and nails in the wall or work in the area where someone pulls on the wires and damages either older wiring or connections. Moisture in the air or on the wire itself can conduct some amount of power, leading to stray current problems that can be challenging for our electrical contractors to resolve and cause hazards as well.

Old Appliances and Special Appliance Outlets

Electric stoves can last, with a few burner replacements, for dozens of years, there are some homes that still have early electric stoves dating back nearly a century. They can be a fun curiosity as well as a functional cooktop and oven, but they come from a different time with limited electrical standards and there has been plenty of time passing to cause damage to the wiring in the unit and the connection to your home’s high powered stove circuit. Our electrical contractors can check various characteristics of your wiring to see if it’s still in good shape, but ultimately the best way to know that your wiring is good is to visually inspect or simply replace it. Other older electric stoves have outlived their usefulness, with rust, grease, and wiring damage that strongly suggests it’s time for a newer model. How about an induction cooktop that makes it hard to burn yourself? Or a modern stove with high-performance burners and electronic controls and timers, and a convection oven. Our electrical contractors can update your wiring and install a new appliance for your safety as well as convenience in cooking.

Switches and Lighting Fixtures from the Past or Poorly Wired Present

Our electrical contractors often find hidden electrical problems in light fixtures, especially from water damage, and worn-out switches that arc and spark are disasters waiting to happen. Those wonderful silent mercury switches that were popular decades ago are quite durable, but a modern understanding of the health risks of mercury has led to their being treated as hazardous waste when they are replaced and disposed of. Switches can hide poor wiring jobs, and they receive even more physical force than electric outlets that could displace wires or cause damage. Light fixtures need to be firmly mounted and properly wired, electricians find way too many ceiling fixtures and even fans that are loosely wired or even tugging on or suspended by wiring.

Your Safety-Minded, Quality-Focused Electrical Contractor in Arlington, TX

Our electrical contractor team at Tioga Contractors aims to leave quality wiring when a job is done in Arlington TX, both new wiring that we perform and upgrades or corrections to existing wiring that has aged or never quite met requirements. With proper care, your home’s wiring can be reliable, low-risk, and long-lasting, taking advantage of modern protective technologies to further reduce the chance of electrically related harm. Call us for high-quality electrical contractors who focus on high electrician standards, and also for careful inspection of your existing electrical wiring, fixtures, and circuit breaker panel.

Photo By tacojim at istock

At Tioga Contractors, we’re electrical contractors that help families live better together. Our customers in Arlington, TX, and the surrounding Tarrant County area love their new electrical panels and upgraded electrical service. It gives them so many more ways to welcome guests to a home-cooked meal made on the new induction stove, enjoy family events with amazing movies on their home theater system, and play interactive games with friends online while they should be doing homework but someone’s busy in the home office on a videoconference and not checking upon them. Not to mention there’s a new charging station for the EV, 240 Volt power in the garage for the new shop tools, and great lighting and audio out on the patio, with GFCI-protected power outlets for convenience.

Actually, the kitchen is pretty cool too, with a smart screen for chatting and recipe videos, a smart fridge, and plenty of GFCI outlets for appliances or just conveniently charging phones while people chat and taste test the food. As electrical contractors, we can make it all happen, or just get it started with a new electrical panel. So, what got this hypothetical family started on such an important electrical project? It’s like needing more living space at home.

When You Need Rewiring as Well as a New Panel

If you buy a nice appliance with a three-pronged plug and your first thought is, do I use one of those adapter things, or another trick to make it fit in my old two-pronged outlets? then you need to think about rewiring and new outlets. We’ve gone several generations beyond switching to three-pronged grounded outlets, now using special child-resistant outlets that only take plugs, not knives and forks. By the way, if you’re replacing an old outlet with a three-pronged one, because that’s what the store has, you’re telling people that the outlet is now grounded. Is it? Can they rely on the safety of the ground? There really needs to be a ground wire connected or another acceptable solution that gives you the right protection.

When you have electrical contractors rewire your home, you make sure that the power capacity matches the wire, so everything stays safe. You also replace old-style wires that may not be right for you anymore. That includes aluminum wiring, which was a fine idea in its time but presents so many problems it’s worth replacing with copper. We probably don’t need to talk about “knob and tube” since that’s not really common around here, but some people still have that quaint and functional but oh-so ancient stuff behind their walls and in their attics, fascinating to look at.

Going Beyond Outlet Count and Light Switches

New construction requires plenty of outlets in each room, about six feet apart, in part to ensure that there’s little need for extension cords. In some rooms like home offices and teenagers’ rooms, those should probably be quad outlets with other accommodations for power access and even network and cable TV connections. If you’re going all out with a home theater system and aren’t using a rack and PDU (power distribution unit), our team can put their commercial experience to work for you and provide ample power access convenient to your equipment. Don’t forget that our wiring experts can also run other wiring professionally and to code including network and audiovisual connections.

Working with your electrician, you can create a renovation or multi-step plan to renew your home and take advantage of new electrical possibilities. For lighting, things get a little bit more complex these days, with different types of dimmers available depending on the type of lights you’re using, plus remotely controlled smart switches and smart lights. One big plus with modern LED lighting is there’s less concern about heat when installing recessed lighting, providing lots of great options for interior design.

Replacing Old Fuse Boxes and Breaker Panels

The heart of an electrical makeover for your home is having your electrical contractors install a solid, standardized breaker panel to replace your fuse box and even certain types of circuit breaker installations from years ago that have been determined to be unreliable. Our electrical contractors can inspect your installation and let you know if a replacement is a good idea. If you have older equipment like these, you probably have a lower capacity connection to the power company, which is worth thinking about as well, especially if you’ve got higher-current equipment on your mind including EV charging stations. Modernizing your breaker panel and electric service together is an important way to step up your home’s electrical possibilities for the future, too.

Extending Your Capacity with a Sub Panel

If you’re already expanding, running power to your garage or outbuildings, building an addition on your house or otherwise adding a bunch of electrical capacity, a sub-panel is sometimes a good option, adding on your main breaker box with a smaller one. Your electrical contractors can tell you whether expanding your current box is a better option for you or adding a sub-panel. One thing to bear in mind is that leaving extra room for future circuits is an important part of breaker box upgrades. With a few blank spots at the bottom, adding a new kitchen circuit or power for your woodworking shop is a quick matter of running the wire and installing the breaker, assuming your electrical service has the capacity. Your electrical contractors can help you plan ahead.

Electrical Contractors for Your Family’s Lifestyle in Arlington, TX

Safety is an important reason to have electrical contractors provide adequate modern power access in your home. It’s also about your lifestyle, and easily using the gadgets and adding the features that your family enjoys, from computer equipment to smart lighting, a professional home office, home theater, and smart kitchen. Call Tioga Contractors to get started on your home in Arlington, TX.

Photo By Breadmaker at Shutterstock

If you’ve watched home improvement shows or checked out electrician videos on YouTube, you’ve seen the diversity of electrical wiring that licensed electricians find on the job. There are many ways that creative wiring can take place and many oversights that can occur in past electrical work that as electrical contractors we notice as we repair or upgrade your electrical wiring and fixtures. In many cases, we also notice that homes could benefit from upgrading to newer electrical standards such as tamper-proof outlets that protect children. Serving Arlington, TX and the surrounding area, we’re Tioga Contractors, your local professional electrician, and we’re here to do a great job for you.

Licensed Electricians Have Deep Theoretical Knowledge and Solid Hands-On Training

It’s the combination of knowledge and experience that makes such a difference when we serve as electrical contractors for our customers in the Arlington, TX area. From the details of wiring outlets and switches to the type of wire and conduit that’s appropriate, we understand what a job well done should look like. We also can anticipate your future electrical needs, making suggestions and performing our work so that there’s room to expand and add new wiring. Upgrading your electrical service and panel is often a great place to start, as we can not only add more capacity for future circuits and remodeling but review your wiring and catch any existing problems while we work. When we’re wiring new circuits to a remodeled room, repurposed home office, or other upgraded space, we can also talk with you about running other wiring such as network, security, or audio-video wiring.

Where We’ve Been, We’ve Left Our Professional Mark

You’ve probably watched home improvement shows or videos online where the electrical contractors start a remodeling job by opening up existing walls and inspecting the current wiring. They might also take a look at the electrical panel and see how years of upgrades and modifications have affected the wiring. In either case, they’ll probably comment and sigh about how good work can go astray over the years. In fact, even brand-new construction done at the speed today’s teams need to work can have a few surprises.

Whether we find aluminum wire that should be replaced, or old Federal Pacific circuit breakers and panels that could be dangerous, or simply loose connections and occasional wiring issues, we’ll make sure that you have the option to do something about them. Perhaps your kitchen and bathrooms don’t yet have GFCIs installed to protect from shock and you didn’t realize they were needed. What about other advanced protection such as arc, lightning, and surge protection? We can help you understand modern safety standards and how you can implement them. When we perform our own work as electrical contractors, we’ll double-check to ensure that we’re done the job to current standards and make sure that it reflects our professional skill and experience.

Helping You Understand Your Options for Your Electrical Project

When you bring us on as your electrical contractors, we’re working to implement your vision and ideas with our own professional skills. Our team takes care of the details, from basic wiring techniques such as which way wire is wrapped around screws when connecting an outlet, to ensuring that the right kind of wire at the right rating is run through your walls, ceilings, and outside. We ensure that junctions and other wiring methods are done carefully and professionally so that they’re safe and reliable. There are reasons for our standards, and that’s an important factor in considering an electrician for your work: to make sure that top-quality work helps avoid problems from unexpected situations in the future.

Handling Unexpected Damage from Water or Wiring Issues

Issues of technique and materials are not the only surprises we find when we’re upgrading and maintaining old wiring and fixtures. Sometimes there are issues from past water damage, wiring problems that have led to overheating, or other hidden harm to your wiring. These kinds of damage can remain hidden and functional for decades, but they will pose a serious risk until they are repaired. They may have actually revealed themselves as occasional dimming of the lights, strange smells, or even blinking lights. As electrical contractors, we have experience and know exactly what needs to be repaired and replaced to make your damaged wiring and fixtures safe, including issues like replacing wire that moisture may have invaded. When we take care of wiring damage from the past, we’ll leave your family safer as well.

We Have Plenty of Satisfied Customers, So We Know What Upgrades You Might Like Too

Another area of experience we’ve gained as electrical contractors is how design meets the needs of our clients. Unless you visit others frequently, you probably have limited ideas about what might be right for your home, whether it’s the number, type, and placement of electrical outlets, specialized lighting and controls, or adding new electrical features. Our team keeps up to date with technology and style, and can help you consider new ideas and solutions, especially if you’re not sure where to start. Our experience is what you need to keep your home safe and in style. From your alternative power sources to your home theater and smart home gear, we’re the team for you to partner with for quality electrical service.

At Tioga Contractors, We Focus on Improving Your Home or Business

Our team of electrical contractors at Tioga Contractors has the skills and experience to ensure that you’ll be proud of your new space and its professional wiring. You’ll enjoy your new fixtures and the versatile controls we’ve connected to operate them. Confidence in your electrical contractors gives you the opportunity to build a professional relationship with us and expand your options with new power connections and devices. We’re ready to work with you in the Arlington, TX area. Give our skilled team of electricians a call and get your work done with a professional touch.

Photo By RossHelen at istock

Living in the Bedford, TX area, people have plenty of time each year to enjoy their yards and basically move outdoors to enjoy the weather. The reasons to stay inside are few, and with a bit of help from our electricians at Tioga Contractors, even cooking, working on the computer, and watching TV and streaming movies are easy to relocate outside. Our team of expert electricians know what it takes to install reliable, safe, weatherproof outdoor power and fixtures, and create a space for work and fun that you’ll enjoy under the Texas sunshine. With professionally-installed power on your patio, around your deck, or by your pool, your family’s living and working space has just become a lot bigger and more comfortable.

Imagine, and Let Us Install Your Great Outdoors

Lights, convenient power, and built-in media features make your yard so much more accessible after dark. People can find the perfect spot and enjoy, whether it’s some path lighting leading to a softly lit park bench or a full-wired gazebo where the kids can play now, adults can relax and talk later. By the pool, lights add convenience and safety after dark as well as setting the mood for a midnight swim or an energetic pool party. Decks and patios with power have what it takes to cook, chat, work from home without worrying about laptop batteries, and listen to music from built-in weatherproof smart speakers. With convenient power, many families now bring out a projector and screen and have movie nights under the stars. Our team of electricians has endless ideas of how you can transform your outdoor spaces into active social spaces.

Sports Under the Lights and Much More

Nights in Bedford, TX are perfect for backyard sports. How about playing at night, when summer air gets cooler and more people can play? Just depending on lights from under the eaves of your house tends to be mostly blinding or casting long shadows, complicating your game of volleyball or soccer. Our electricians can create the right lighting for your situation with residential or industrial fixtures, safe, convenient wiring, and easy controls including smart home integration. Once you have the power extended throughout your yard, you’ll have lots more options as well, including creating separate spaces for study and work, lighting your landscaping for beautiful evening effects, and providing ambient music in various locations rather than “turning it up” back at the house.

Professional Installation Makes the Difference in Safety and Long-Lasting Reliability

Our expert electricians know just how to run the wiring, and what type of wire to use. We use conduit appropriately and make sure that your wiring is at a safe depth, using specialized techniques to run everything with minimum impact to your home and yard. We know how to make sure GFCI equipment protects you in the yard, on the patio, and by the pool. As the seasons turn, everything outdoors faces challenges as materials expand and contract, moisture tries to seep in, and insects look for a home. We install your outdoor power and electrical fixtures to protect against damage from nature’s cycles in the future, as well as making them look and work beautifully right now.

Organize Your Outdoor Spaces with Power Where You Need It

One of our favorite ways to make the outdoors come alive for customers is to help customize a deck or patio as an outdoor eating space. A bit of custom brickwork, a built-in space for the barbecue with rotisserie outlet, and a work surface with lighting make you look like a professional when you put your apron on. Add plenty of power for appliances, and of course sound and plenty of outlets for phones, laptops, and other necessities, and you can organize great events and keep trips back inside to a minimum. At Tioga Contractors, we can also do your plumbing so ask about a custom sink as well.

Extending Technology’s Reach

Running network wiring to weatherproof access points outside your home gives you a signal in your yard where, if you’ve done the wiring, you can plug in at many locations and claim your workspace, study space, even gaming outdoors spot. With access to power and wiring options, you have a choice of other tech hardware such as smart lights, security cameras, and party features like LED strips. Ask our electrician for typical applications we’ve seen, and you can benefit from our outdoor wiring and entertainment experience. Once you see how easy it is to “empower” your outdoors, you’ll be thinking creatively as well. Do you want an outdoor crafts and hobby space? Lights and sound for an outdoor exercise and weightlifting space? Imagine it!

Expanding Your Home’s Power

As with any expansion and remodeling project, our electricians will keep an eye on your home’s overall power and circuit breaker capacity. If it’s appropriate, they may recommend that you add a subpanel or expand your current one to accommodate more circuits now and leave room for the future. If you’d like to go for a real workshop in the garage or provide power to an outbuilding or shed, they can also install panels as appropriate rather than leave all your power centralized in the house. For homeowners who have serious auto, woodworking, or other shops and need more power for specialized equipment, having qualified electricians to do it right can be a great way to go.

Tioga Contractors Creates What You Imagine

Our team of electricians and other professionals can create an outdoor space for you that extends your home’s power, water, network, video, and sound to your yard. Let us help you imagine and build your outdoor alternative, as beautiful and functional as inside your home. We serve the Bedford, TX area with skilled residential, commercial, and industrial contracting services and design support. Give us at Tioga Contractors a call and let’s create a special outdoor space for your home.

Photo By Photographee.eu at Shutterstock

Photo By rzelich at istock

Electricity is not only a necessity but also a central pillar of modern living. However, despite its utility, electricity has also been the culprit of both major and minor disasters around us. When considering household electric appliances, safety is of paramount importance. Access to qualified electrical contractors within Arlington, TX, who can quickly identify and solve common home electrical problems is a significant step towards promoting safety within your home.

In this post, we highlight ten common electrical problems around the home to look out for:

Frequent Electrical Surges

Electrical surges may result from a damaged power line, poor household wiring, a lightning strike. An electrical surge causes a massive increase in a power line that increases the current to your outlet. Frequent electrical surges may damage electronics and home appliances and diminish their life expectancy.

In this instance, the culprit is often the wiring or an electrical device connected to the home grid, which electrical contractors can quickly rectify.

Circuit Overloading

An overloaded circuit is one of the leading culprits of a circuit breaker that trips often. Homes and apartments that cannot cater to the amount of electricity they require experience circuit overloading. Some simple solutions for this electrical problem include avoiding overburdening one circuit, removing devices that aren’t in use, and mindfully connecting devices around your home.

Power Sags and Dips

Power sags and dips are attributed to the electrical devices connected to your grid that may draw a lot of power, be made with substandard materials, or are faulty. It is experienced as the lights dimming and then getting bright again.

Electrical Shocks

Electrical shocks are a nasty and unfortunate experience. At worst, they are very dangerous, but normally they are a mild shock that reminds you to be cautious when handling electricity. These shocks are caused when an appliance is faulty or the wiring is not correctly done; therefore, it is essential to be careful when turning them on and off. It is advisable to speak to electrical contractors around Arlington, TX, if your appliance has this problem.

Unusually High Electric Bills

High electrical bills are frustrating and pretty expensive. During the summer and winter, higher bills are expected due to the constant use of the HVAC system. However, if your bills are unusually high in the off-season, you need an electrical contractor to check it out. An easy way to handle this would be to:

  • Identify and fix devices causing a power surge.
  • Unplugging devices that aren’t in use.
  • Repairing damaged circuits and wiring.
  • Use surge protectors and GFCI outlets.
  • Using a smart or digital thermostat that can be programmed to regulate temperature appropriately.

Breakers That Trip Often

Circuit breakers provide a means to protect your home. When your breakers trip, it’s a sign that your home is protected. High wattage appliances such as hairdryers and microwaves can trip your circuit breaker, primarily when used from the same source. Identify what led to the circuit trip and use a low setting. Limit the electrical usage on a single circuit, especially when using high-watt devices. Consult electrical contractors if these tips do not help manage the circuit breaker.

Uncovered Junction Boxes

A junction box houses a ton of wires that are interconnected and is usually installed during construction. The box should have a cover, and when left uncovered, it could lead to electrical shocks, which could cause safety issues. You need to contact electrical contractors to cover the junction box to restore safety within your home.

Fewer Outlets

Most houses heavily rely on extension cords and power strips to access power. However, extension cords are designed for temporary use. If you intend to use it for permanent use, try using a UL-listed surge protector or at least a 14-gauge heavy load cord. Avoid daisy-chaining two extensions together, and call electrical contractors if you need more outlets.

Lights That Aren’t Right.

Lights can let you know whether you have a bigger underlying issue. Lights that are brighter or dimmer than others could indicate you have a poor neutral connection, or they simply have different wattage. Flickering lights are a sign of frayed wiring. Some lights have an inbuilt safety feature that automatically turns off when the bulb overheats. Your lights may burn out before they should for different reasons:

  • The insulation is close to the light source
  • The wattage is too high
  • Too much wattage on a dimmer switch
  • Poor wiring on the circuit

If your lights are displaying any of these problems, you need to call electrical contractors to take a look.

Overcircuted Panel

An overcircuted panel is a fire hazard to your home. An electrical panel is designed to accommodate a certain number of circuit breakers. You need to determine the right panel for your home depending on the maximum load capacity. The circuit breakers fit into slots, and you can tell how many yours holds by prying the panel door open and taking a peek. Using a tandem breaker in one slot instead of two single pole breakers is a code violation. To avoid this, contact professional electrical contractors to add a sub-panel or replace the existing one with a bigger model.

While the above electrical problems that could be experienced at home aren’t exhaustive, they are an excellent place to start when ensuring the safety of your loved ones.

Tioga Contractors is your premier provider of electrical contractors in the area. We offer both commercial and residential electrical installation and repair services. With over 60 years in the service industry, we value and greatly prioritize customer satisfaction. Our HomeAdvisor top-rated award portrays our commitment to superior work practices, services, and value. We offer fast on-time services and prompt emergency services 24 hours a day, all year long. Get in touch with us today for more information about our commercial and residential electrical solutions.