shower

Photo By Roka at Shutterstock

It’s common for water to drip from a shower head when it isn’t in use, which is an annoying problem. A leaking or dripping shower can cause homeowners issues like damp and moisture in the bathroom, encouraging mold and mildew to grow. A definite need to call a plumber. 

If water drips from your show head while you’re running a bath, this may indicate that one or more of the showers’ replaceable parts have worn out or become damaged. There is a diverter in the faucet that diverts the water to either the bath or shower. If this component isn’t working effectively, your show will drip when you run a bath. This problem can be easily rectified by a professional who can replace the parts and repair so shower to no longer drip.

You may find that large quantities of water will flow from your shower head while you’re running a bath in more severe situations. This indicates that there’s a more serious problem, and you’ll need to call a plumber who can offer professional advice.

This article will look at the causes of a dripping shower head. We’ll tell you why your show drips while you run a bath and help you solve the problem. It would be best if you never did DIY plumbing unless you know what you’re doing; instead, call a local plumber. If you’re searching for a professional in Irving, TX, or the surrounding area, don’t hesitate to contact Tioga Contractors.

Why does water drip from my shower head when I fill the bath?

There are several reasons that your shower may be dripping while you run a bath. This is a surprisingly common problem and can be very annoying, especially if you’re enjoying a warm bath, and the shower continues to drip cold water onto you. Before calling a plumber, you can turn the water off at the main valve. This will stop water flowing into your home, which may cause damage or flooding.

Water Volume

If your shower head is dripping when you’re filling your bath, you should call a professional to check whether the replaceable parts have worn out. A professional will also be able to check how much water is flowing through the shower’s system and can change the volume if necessary.

If the water volume is too high, this will create an increase in pressure, which will cause to shower head to drip. If this is the problem, a plumber may need to use a wider pipe, which will help reduce the pressure build-up.

Replaceable parts wearing out

A professional plumbing company will also check the replaceable parts, such as washers and the water flow regulator. These suffer from wear and tear over time and are commonly damaged. Simply replacing these parts will ensure that your shower no longer drips.

The diverter is a part that diverts water from the bath to the shower, and if it’s worn out or weakening, it won’t be able to do its job correctly and will need to be replaced. In some cases, the diverter would have become loose and simply needs to be tightened. A plumber will also look for loose fittings inside the shower system and will tighten these up or replace them as necessary.

Dirt in the Shower Head

Over time dirt and debris will build up in your shower head, which will result in it not working as effectively as it should. Shower heads need to be cleaned regularly. To do this, you may need to unscrew the shower head and look inside. Some shower heads have rubber coating around the holes; these stick up slightly and can be simply pushed in while the shower is running to clean them.

Does the Shower Head Need Changing?

If you’ve cleaned your shower head and it’s still leaking or dripping, you should call a plumber to assess the situation. A professional will be able to either fix the shower head by cleaning it or replacing some of the parts that have worn out. Depending on your shower head condition, a professional may advise that you replace the entire shower head.

Can a shower head become faulty?

Over time shower heads will start to deteriorate and can become faulty. Like everything else, shower heads have an expiry date. Some showers are well designed and manufactured using good quality components, which makes them durable and long-lasting. Others don’t last so long and will need to be replaced.

Shower heads do undergo wear and tear during their life. A good shower head will last a long time, but it may have parts that don’t last as long and need to be replaced. Therefore, it’s essential to get a plumber to look at your shower and undertake any necessary maintenance regularly.

Some manufactures also provide a warranty with their shower heads. When you buy a new shower head, it’s vital to keep any guarantees you’ve received in a safe place. This will also help you get a free replacement showerhead if the open you’ve purchased doesn’t last long enough.

Tioga Contractors

Sometimes, water drips from a shower head when you’re filling the bath. This is a common issue that is caused by several underlying problems. Ask a professional to check out the showerhead and rectify the fault. It’s a good idea to keep your shower head in good condition by regularly cleaning and maintaining it.

If you’re having problems with your shower head and are searching for a plumber in Irving, TX, or the surrounding area, don’t hesitate to contact Tioga Contractors. The company pride themselves on keeping up with technological advances and can carry out all types of plumbing jobs, including repairing water leaks, shower pan and shower head repair or replacement, installing tankless water heaters, fixtures, and appliances. They are a home advisor, top-rated company, and a BBB accredited business.

Tioga Contractors can be contacted at 469-789-1292.

Photo By Mark Sayer at Shutterstock

Are you searching for ways to save money? Perhaps you want to carry out some home improvements that will help to reduce your utility bills. Did you know that changing your shower head could help to save you money? Homeowners are often looking for ways to reduce their household expenses, especially during difficult economic times. There are many small changes that you can make, which will help save you money, and a plumbing service will be able to advise you on your options.

This article will give you some plumbing tips and strategies that will help you to reduce your household costs. By making small changes, you can still retain the quality that you already enjoy while at the same time also helping to soothe your bank balance.

If you’re searching for a plumbing service in Euless, TX, you may like to contact Tioga Contractors. The team offers all types of services and can help you save money on your water bills by installing a new showerhead.

Will changing my showerhead save me money?

One of the most common questions that plumbers are asked is whether changing to a more water-efficient showerhead will help to save money. Showering is known to be a more water-efficient way of washing than taking a bath. However, your showerhead will determine how much water you’re using. More water is being used in many homes than the homeowner thinks, and with a large family, this can quickly add up to high water bills.

If your water supply is unmetered, it’s likely that you won’t think about its impact on your wallet. If your shower has to heat large volumes of water, you’ll be charged vast amounts over time. Many homeowners are changing their showerheads to one that is water saving. Choosing a more water-efficient model of showerhead is a simple way that you can reduce your bills. A water saving showerhead uses less water, which also means there’s less water to heat; this will save you money on both your water and heating bills.

How does a water-saving showerhead work?

Your showerhead is a crucial component of your shower as it controls the flow of water and the shower’s spray pattern. A showerhead that has been specifically designed to save water will restrict the amount of water that’s allowed to flow through the head. This will help to reduce the volume of water that you’re using. You won’t have to compromise on the quality of your shower and will still have a good water pressure.

Different types of water saving showerheads

There are two main types of showerheads to choose from if you aim to save water and reduce your utility bills. Showerheads are either aerating or non-aerating. A non-aerating showerhead saves water by using smaller holes. This means that less water is used as it has to be squeezed out of the showerhead. This creates more pressure and can create a massaging style of shower, something which many people like.

On the other hand, an aerating showerhead works by restricting the flow of water and using air. This gives people the illusion that more water is flowing through the showerhead. These types of showerhead help to create a more regular and softer shower. It usually comes down to personal preferences which kind of shower you prefer, and, likely, your family members will all have slightly differing opinions on the subject.

What to consider when choosing a showerhead?

Before deciding whether or not you need a new showerhead, there are a few things you’ll need to take into account. Investing in a water-saving showerhead can be a cheap way to reduce your water and energy bills and help save you money in the long run.

You’ll first need to decide if a water-saving showerhead is right for your family. Most electric showers already have a water-saving feature built-in, so changing the showerhead wouldn’t necessarily save you money. It may also cause problems with water overheating and result in damage to your shower unit.

Before you decide whether to install a new water-saving showerhead, you can check with a plumbing service to see if your current showerhead is wasting water and increasing your bills. You can also check this yourself with a simple test.

Put a measuring jug under your showerhead, and turn it on. Set a timer for one minute. This will allow you to work out how much water your showerhead releases each minute. You’ll then be able to multiply this by the number of minutes you usually shower to work out how much water you’re using. If your showerhead uses large amounts of water, it would be a good idea to invest in a water saving showerhead.

More Water Saving Tips

If you’re worried about your utility bills, there are several other things that you can do. If there’s recently been a spike in your water bill, this may indicate that there’s a hidden leak somewhere in your home. You can call a plumbing service to investigate the situation and find the leak.

You can also try to save water by taking shorter showers. You may like to use a water-saving timer to achieve this.

Stop any unnecessary water waste by asking a plumbing service to repair any dripping faucets.

Tioga Contractors, Plumbing Service

If you’re looking for a plumbing service or would like to learn more about how to reduce your water bills. Or perhaps have a leak fixed or a water-saving showerhead installed, contact Tioga Contractors today. The plumbing service works throughout Euless, TX, and the surrounding area. Call today on 817-484-5356, and the team will be happy to help you. They can provide leak detection and also offer an emergency call-out plumbing service.

Photo By Brilliant Eye at Shutterstock

Having a drain in your shower that smells can be very unpleasant and is a common problem that plumbers are regularly asked about. If you’re interested in finding out why your showers drain smells, this article will discuss common drain problems and how to solve them.

If you’re searching for a plumbing service in Euless, TX, or the surrounding area, don’t hesitate to contact Tioga Contractors. The company is available to answer any plumbing related questions you may have and can provide help and advice for a wide range of plumbing problems.

Why does the drain in my shower smell?

There are many reasons that shower drains can begin to smell. You may have Mold growing beneath your drain cover, or the drain’s p-trap could have stopped working, which would allow sewer gas to rise through your pipes. One of the most common reasons that your drain in the shower starts to smell is that there could be hair and grime stuck in the drain’s strainer.

You’ll be glad to know that many things that make your drain smells bad can be quickly and easily fixed. Here are some of the main reasons you drain likely to be smelly. You’ll be able to follow these tips to help freshen up your drains. However, if you think that there’s a blockage in your drain or sewer or any other problem with your plumbing system, you should call a service.

Clogged Drain Strainer

Most showers have a strainer that covers the drain, and this catches any hair and soap scum. In time this will start to accumulate and can cause a smell or even a blockage. This is the most common reason that shower drains smell.

To fix this problem, you’ll simply need to remove the stopper and clean it. Some filters may be attached by a screw which needs removing. The strainer can then be emptied and cleaned with soap.

Mold or Mildew Growth

Often mold or mildew will start to grow in the showers drain. This is because the shower drains dark and damp conditions, which are just right for mold and mildew to grow. Mold or mildew is likely to accumulate in gaps between the drain cover and the tub. It’s essential to have your strainer and shower installed correctly. It needs to be sealed to reduce the likelihood of mold and mildew developing.

If your shower drain smells because of mold or mildew, you can clean it using a mold removal solution. This is available from most supermarkets.

If you think that your shower or drain strainer hasn’t been installed correctly, you can call a plumbing service, and they will check that everything’s in working order and apply sealant where necessary.

Dry p-trap

The drain has a curved pipe known as a “p-trap,” this pipe is a fixture that connects the drain to the rest of your plumbing system. This part gets its name because it has a distinctive p shape. The p-traps has a curve that allows it to hold a small amount of water to stop sewer gas from entering your home. If your p-trap isn’t working effectively or is dry, you’ll start to notice a smell coming from your drains. This is usually a gas which has a rotten egg smell.

Sometimes water in the p-drain evaporates, and all you need to do is pour some water down the drain to get it to work again. If you continue to have problems with your shower smelling, you should call in a plumbing service. The plumber will be able to remove the drain strainer and look further into the drain. You may need to have your p-trap replaced.

Clogged or blocked vents

If you keep trying to put water back into your p-trap with no avail, you may find that blocked vents cause it. Pipes have vents so that the air has somewhere to go. Without vents in your plumbing system, suction would be created, which could siphon water out of your trap. This problem happens if your vents get blocked or clogged with hair or soap. Some vents are connected to your trap, and these also connect to a vent stack, which is an outlet for the air. Each pipe in the drainage system will have a vent that’s connected to the vent stack.

In most cases, if a blockage occurs, it will be in the vent stack. You may be surprised to find that the blockage has occurred due to a bird’s nest near the vent stacks entrance. Sometimes debris falls into the vent, and this causes problems.

If a blocked vent has caused your drain smell, it’s relatively easy to rectify. If you know where your vent stack is, you can clear any debris from its entrance. However, it’s likely that the problem will be further inside your pipes, and for this job, you’ll need a plumber. A plumbing service will be able to clear the blockage and will have your water and air flowing effectively again soon.

Tioga Contractors, Plumbing Service

If you’re looking for a plumbing service in Euless, TX, or the surrounding area, you may like to contact Tioga Contractors. The company is very professional and offers a wide range of plumbing services as well as electrical and glass installations. They are available for drain cleaning, leak detection and can fix sewer problems.

Tioga Contractors are a Home Advisor top-rated business, as well as a BBB accredited business. They are a long-running company that provides excellent value for money and has a proven track record of delivering good quality plumbing services.

The company can provide a wide range of plumbing services and can be contacted on 817-484-5356. They are also available for emergency call out.